mne.beamformer.make_lcmv#

mne.beamformer.make_lcmv(info, forward, data_cov, reg=0.05, noise_cov=None, label=None, pick_ori=None, rank='info', weight_norm='unit-noise-gain-invariant', reduce_rank=False, depth=None, inversion='matrix', verbose=None)[source]#

Compute LCMV spatial filter.

Parameters:
infomne.Info

The mne.Info object with information about the sensors and methods of measurement. Specifies the channels to include. Bad channels (in info['bads']) are not used.

forwardinstance of Forward

Forward operator.

data_covinstance of Covariance

The data covariance.

regfloat

The regularization for the whitened data covariance.

noise_covinstance of Covariance

The noise covariance. If provided, whitening will be done. Providing a noise covariance is mandatory if you mix sensor types, e.g. gradiometers with magnetometers or EEG with MEG.

Note

If noise_cov is None and weight_norm='unit-noise-gain', the unit noise is assumed to be 1 in SI units, e.g., 1 T for magnetometers, 1 V for EEG, so resulting amplitudes will be tiny. Consider using mne.make_ad_hoc_cov() to provide a noise_cov to set noise values that are more reasonable for neural data or using weight_norm='nai' for weight-normalized beamformer output that is scaled by a noise estimate.

labelinstance of Label

Restricts the LCMV solution to a given label.

pick_oriNone | str

For forward solutions with fixed orientation, None (default) must be used and a scalar beamformer is computed. For free-orientation forward solutions, a vector beamformer is computed and:

  • None

    Orientations are pooled after computing a vector beamformer (Default).

  • 'normal'

    Filters are computed for the orientation tangential to the cortical surface.

  • 'max-power'

    Filters are computed for the orientation that maximizes power.

  • 'vector'

    Keeps the currents for each direction separate

rankNone | ‘info’ | ‘full’ | dict

This controls the rank computation that can be read from the measurement info or estimated from the data. When a noise covariance is used for whitening, this should reflect the rank of that covariance, otherwise amplification of noise components can occur in whitening (e.g., often during source localization).

None

The rank will be estimated from the data after proper scaling of different channel types.

'info'

The rank is inferred from info. If data have been processed with Maxwell filtering, the Maxwell filtering header is used. Otherwise, the channel counts themselves are used. In both cases, the number of projectors is subtracted from the (effective) number of channels in the data. For example, if Maxwell filtering reduces the rank to 68, with two projectors the returned value will be 66.

'full'

The rank is assumed to be full, i.e. equal to the number of good channels. If a Covariance is passed, this can make sense if it has been (possibly improperly) regularized without taking into account the true data rank.

dict

Calculate the rank only for a subset of channel types, and explicitly specify the rank for the remaining channel types. This can be extremely useful if you already know the rank of (part of) your data, for instance in case you have calculated it earlier.

This parameter must be a dictionary whose keys correspond to channel types in the data (e.g. 'meg', 'mag', 'grad', 'eeg'), and whose values are integers representing the respective ranks. For example, {'mag': 90, 'eeg': 45} will assume a rank of 90 and 45 for magnetometer data and EEG data, respectively.

The ranks for all channel types present in the data, but not specified in the dictionary will be estimated empirically. That is, if you passed a dataset containing magnetometer, gradiometer, and EEG data together with the dictionary from the previous example, only the gradiometer rank would be determined, while the specified magnetometer and EEG ranks would be taken for granted.

The default is 'info'.

weight_normstr | None

Can be:

  • None

    The unit-gain LCMV beamformer [1] will be computed.

  • 'unit-noise-gain'

    The unit-noise gain minimum variance beamformer will be computed (Borgiotti-Kaplan beamformer) [1], which is not rotation invariant when pick_ori='vector'. This should be combined with stc.project('pca') to follow the definition in [1].

  • 'nai'

    The Neural Activity Index [2] will be computed, which simply scales all values from 'unit-noise-gain' by a fixed value.

  • 'unit-noise-gain-invariant'

    Compute a rotation-invariant normalization using the matrix square root. This differs from 'unit-noise-gain' only when pick_ori='vector', creating a solution that:

    1. Is rotation invariant ('unit-noise-gain' is not);

    2. Satisfies the first requirement from [1] that w @ w.conj().T == I, whereas 'unit-noise-gain' has non-zero off-diagonals; but

    3. Does not satisfy the second requirement that w @ G.T = θI, which arguably does not make sense for a rotation-invariant solution.

Defaults to 'unit-noise-gain-invariant'.

reduce_rankbool

If True, the rank of the denominator of the beamformer formula (i.e., during pseudo-inversion) will be reduced by one for each spatial location. Setting reduce_rank=True is typically necessary if you use a single sphere model with MEG data.

Changed in version 0.20: Support for reducing rank in all modes (previously only supported pick='max_power' with weight normalization).

depthNone | float | dict

How to weight (or normalize) the forward using a depth prior. If float (default 0.8), it acts as the depth weighting exponent (exp) to use None is equivalent to 0, meaning no depth weighting is performed. It can also be a dict containing keyword arguments to pass to mne.forward.compute_depth_prior() (see docstring for details and defaults). This is effectively ignored when method='eLORETA'.

Changed in version 0.20: Depth bias ignored for method='eLORETA'.

New in version 0.18.

inversion‘single’ | ‘matrix’

This determines how the beamformer deals with source spaces in “free” orientation. Such source spaces define three orthogonal dipoles at each source point. When inversion='single', each dipole is considered as an individual source and the corresponding spatial filter is computed for each dipole separately. When inversion='matrix', all three dipoles at a source vertex are considered as a group and the spatial filters are computed jointly using a matrix inversion. While inversion='single' is more stable, inversion='matrix' is more precise. See section 5 of [3]. Defaults to 'matrix'.

New in version 0.21.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns:
filtersinstance of Beamformer

Dictionary containing filter weights from LCMV beamformer. Contains the following keys:

‘kind’str

The type of beamformer, in this case ‘LCMV’.

‘weights’array

The filter weights of the beamformer.

‘data_cov’instance of Covariance

The data covariance matrix used to compute the beamformer.

‘noise_cov’instance of Covariance | None

The noise covariance matrix used to compute the beamformer.

‘whitener’None | ndarray, shape (n_channels, n_channels)

Whitening matrix, provided if whitening was applied to the covariance matrix and leadfield during computation of the beamformer weights.

‘weight_norm’str | None

Type of weight normalization used to compute the filter weights.

‘pick-ori’None | ‘max-power’ | ‘normal’ | ‘vector’

The orientation in which the beamformer filters were computed.

‘ch_names’list of str

Channels used to compute the beamformer.

‘proj’array

Projections used to compute the beamformer.

‘is_ssp’bool

If True, projections were applied prior to filter computation.

‘vertices’list

Vertices for which the filter weights were computed.

‘is_free_ori’bool

If True, the filter was computed with free source orientation.

‘n_sources’int

Number of source location for which the filter weight were computed.

‘src_type’str

Type of source space.

‘source_nn’ndarray, shape (n_sources, 3)

For each source location, the surface normal.

‘proj’ndarray, shape (n_channels, n_channels)

Projections used to compute the beamformer.

‘subject’str

The subject ID.

‘rank’int

The rank of the data covariance matrix used to compute the beamformer weights.

‘max-power-ori’ndarray, shape (n_sources, 3) | None

When pick_ori=’max-power’, this fields contains the estimated direction of maximum power at each source location.

‘inversion’‘single’ | ‘matrix’

Whether the spatial filters were computed for each dipole separately or jointly for all dipoles at each vertex using a matrix inversion.

Notes

The original reference is [2].

To obtain the Sekihara unit-noise-gain vector beamformer, you should use weight_norm='unit-noise-gain', pick_ori='vector' followed by vec_stc.project('pca', src).

Changed in version 0.21: The computations were extensively reworked, and the default for weight_norm was set to 'unit-noise-gain-invariant'.

References

Examples using mne.beamformer.make_lcmv#

Source reconstruction using an LCMV beamformer

Source reconstruction using an LCMV beamformer

Compute evoked ERS source power using DICS, LCMV beamformer, and dSPM

Compute evoked ERS source power using DICS, LCMV beamformer, and dSPM

Compute cross-talk functions for LCMV beamformers

Compute cross-talk functions for LCMV beamformers