mne.io.Raw ¶

Show EOG artifact timing¶

add_events(events, stim_channel=None, replace=False)[source]¶

Add events to stim channel.

Parameters

eventsndarray, shape (n_events, 3): Events to add. The first column specifies the sample number of each event, the second column is ignored, and the third column provides the event value. If events already exist in the Raw instance at the given sample numbers, the event values will be added together.
stim_channelstr | None: Name of the stim channel to add to. If None, the config variable ‘MNE_STIM_CHANNEL’ is used. If this is not found, it will default to ‘STI 014’.
replacebool: If True the old events on the stim channel are removed before adding the new ones.

Notes

Data must be preloaded in order to add events.

Examples using add_events:

add_proj(projs, remove_existing=False, verbose=None)[source]¶

Add SSP projection vectors.

Parameters

projslist: List with projection vectors.
remove_existingbool: Remove the projection vectors currently in the file.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

selfinstance of Raw | Epochs | Evoked: The data container.

Examples using add_proj:

Read and visualize projections (SSP and other)¶

Compute the power spectral density of raw data¶

Computing a covariance matrix¶

property annotations¶: Annotations for marking segments of data.

anonymize(daysback=None, keep_his=False, verbose=None)[source]¶

Anonymize measurement information in place.

Parameters

daysbackint | None: Number of days to subtract from all dates. If None (default), the acquisition date, info['meas_date'], will be set to January 1ˢᵗ, 2000. This parameter is ignored if info['meas_date'] is None (i.e., no acquisition date has been set).
keep_hisbool: If True, his_id of subject_info will not be overwritten. Defaults to False.

Warning

This could mean that info is not fully anonymized. Use with caution.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only.

Returns

instinstance of Raw | Epochs | Evoked: The modified instance.

Notes

Removes potentially identifying information if it exists in info. Specifically for each of the following we use:

meas_date, file_id, meas_id
A default value, or as specified by daysback.
subject_info
Default values, except for ‘birthday’ which is adjusted to maintain the subject age.
experimenter, proj_name, description
Default strings.
utc_offset
None.
proj_id
Zeros.
proc_history
Dates use the meas_date logic, and experimenter a default string.
helium_info, device_info
Dates use the meas_date logic, meta info uses defaults.

If info['meas_date'] is None, it will remain None during processing the above fields.

Operates in place.

New in version 0.13.0.

append(raws, preload=None)[source]¶

Concatenate raw instances as if they were continuous.

Note

Boundaries of the raw files are annotated bad. If you wish to use the data as continuous recording, you can remove the boundary annotations after concatenation (see mne.Annotations.delete()).

Parameters

rawslist, or Raw instance: List of Raw instances to concatenate to the current instance (in order), or a single raw instance to concatenate.
preloadbool, str, or None (default None): Preload data into memory for data manipulation and faster indexing. If True, the data will be preloaded into memory (fast, requires large amount of memory). If preload is a string, preload is the file name of a memory-mapped file which is used to store the data on the hard drive (slower, requires less memory). If preload is None, preload=True or False is inferred using the preload status of the instances passed in.

Examples using append:

apply_function(fun, picks=None, dtype=None, n_jobs=1, channel_wise=True, verbose=None, *args, **kwargs)[source]¶

Apply a function to a subset of channels.

The function “fun” is applied to the channels defined in “picks”. The data of the Raw object is modified inplace. If the function returns a different data type (e.g. numpy.complex) it must be specified using the dtype parameter, which causes the data type used for representing the raw data to change.

The Raw object has to have the data loaded e.g. with preload=True or self.load_data().

Note

If n_jobs > 1, more memory is required as len(picks) * n_times additional time points need to be temporaily stored in memory.

Note

If the data type changes (dtype != None), more memory is required since the original and the converted data needs to be stored in memory.

Parameters

funcallable(): A function to be applied to the channels. The first argument of fun has to be a timeseries (numpy.ndarray). The function must operate on an array of shape (n_times,) if channel_wise=True and (len(picks), n_times) otherwise. The function must return an ndarray shaped like its input.
picksstr | list | slice | None: Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all data channels(excluding reference MEG channels).
dtypenumpy.dtype (default: None): Data type to use for raw data after applying the function. If None the data type is not modified.
n_jobsint (default: 1): Number of jobs to run in parallel. Ignored if channel_wise is False.
channel_wisebool (default: True): Whether to apply the function to each channel individually. If False, the function will be applied to all channels at once.

New in version 0.18.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.
*argslist: Additional positional arguments to pass to fun (first pos. argument of fun is the timeseries of a channel).
**kwargsdict: Keyword arguments to pass to fun.

Returns

selfinstance of Raw: The raw object with transformed data.

Examples using apply_function:

Importing data from MEG devices¶

apply_gradient_compensation(grade, verbose=None)[source]¶

Apply CTF gradient compensation.

Warning

The compensation matrices are stored with single precision, so repeatedly switching between different of compensation (e.g., 0->1->3->2) can increase numerical noise, especially if data are saved to disk in between changing grades. It is thus best to only use a single gradient compensation level in final analyses.

Parameters

gradeint: CTF gradient compensation level.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

rawinstance of Raw: The modified Raw instance. Works in-place.

Examples using apply_gradient_compensation:

apply_hilbert(picks=None, envelope=False, n_jobs=1, n_fft='auto', verbose=None)[source]¶

Compute analytic signal or envelope for a subset of channels.

Parameters

picksstr | list | slice | None: Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all data channels(excluding reference MEG channels).
envelopebool: Compute the envelope signal of each channel. Default False. See Notes.
n_jobsint: The number of jobs to run in parallel (default 1). Requires the joblib package.
n_fftint | None | str: Points to use in the FFT for Hilbert transformation. The signal will be padded with zeros before computing Hilbert, then cut back to original length. If None, n == self.n_times. If ‘auto’, the next highest fast FFT length will be use.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

selfinstance of Raw, Epochs, or Evoked: The raw object with transformed data.

Notes

Parameters

If envelope=False, the analytic signal for the channels defined in picks is computed and the data of the Raw object is converted to a complex representation (the analytic signal is complex valued).

If envelope=True, the absolute value of the analytic signal for the channels defined in picks is computed, resulting in the envelope signal.

If envelope=False, more memory is required since the original raw data as well as the analytic signal have temporarily to be stored in memory. If n_jobs > 1, more memory is required as len(picks) * n_times additional time points need to be temporaily stored in memory.

Also note that the n_fft parameter will allow you to pad the signal with zeros before performing the Hilbert transform. This padding is cut off, but it may result in a slightly different result (particularly around the edges). Use at your own risk.

Analytic signal

The analytic signal “x_a(t)” of “x(t)” is:

x_a = F^{-1}(F(x) 2U) = x + i y

where “F” is the Fourier transform, “U” the unit step function, and “y” the Hilbert transform of “x”. One usage of the analytic signal is the computation of the envelope signal, which is given by “e(t) = abs(x_a(t))”. Due to the linearity of Hilbert transform and the MNE inverse solution, the enevlope in source space can be obtained by computing the analytic signal in sensor space, applying the MNE inverse, and computing the envelope in source space.

Examples using apply_hilbert:

apply_proj(verbose=None)[source]¶

Apply the signal space projection (SSP) operators to the data.

Parameters

verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

selfinstance of Raw | Epochs | Evoked: The instance.

Notes

Once the projectors have been applied, they can no longer be removed. It is usually not recommended to apply the projectors at too early stages, as they are applied automatically later on (e.g. when computing inverse solutions). Hint: using the copy method individual projection vectors can be tested without affecting the original data. With evoked data, consider the following example:

projs_a = mne.read_proj('proj_a.fif')
projs_b = mne.read_proj('proj_b.fif')
# add the first, copy, apply and see ...
evoked.add_proj(a).copy().apply_proj().plot()
# add the second, copy, apply and see ...
evoked.add_proj(b).copy().apply_proj().plot()
# drop the first and see again
evoked.copy().del_proj(0).apply_proj().plot()
evoked.apply_proj()  # finally keep both

Examples using apply_proj:

property ch_names¶: Channel names.

close()[source]¶

Clean up the object.

Does nothing for objects that close their file descriptors. Things like RawFIF will override this method.

property compensation_grade¶: The current gradient compensation grade.

copy()[source]¶

Return copy of Raw instance.

Returns

instinstance of Raw: A copy of the instance.

Examples using copy:

Plot sensor denoising using oversampled temporal projection¶

Resampling data¶

Signal-space separation (SSS) and Maxwell filtering¶

Plot sensor denoising using oversampled temporal projection¶

crop(tmin=0.0, tmax=None, include_tmax=True)[source]¶

Crop raw data file.

Limit the data from the raw file to go between specific times. Note that the new tmin is assumed to be t=0 for all subsequently called functions (e.g., time_as_index, or Epochs). New first_samp and last_samp are set accordingly.

Thus function operates in-place on the instance. Use mne.io.Raw.copy() if operation on a copy is desired.

Parameters

tminfloat: Start time of the raw data to use in seconds (must be >= 0).
tmaxfloat: End time of the raw data to use in seconds (cannot exceed data duration).
include_tmaxbool: If True (default), include tmax. If False, exclude tmax (similar to how Python indexing typically works).

New in version 0.19.

Returns

rawinstance of Raw: The cropped raw object, modified in-place.

Examples using crop:

Working with events¶

Signal-space separation (SSS) and Maxwell filtering¶

The Epochs data structure: discontinuous data¶

del_proj(idx='all')[source]¶

Remove SSP projection vector.

Note

The projection vector can only be removed if it is inactive (has not been applied to the data).

Parameters

idxint | list of int | str: Index of the projector to remove. Can also be “all” (default) to remove all projectors.

Returns

selfinstance of Raw | Epochs | Evoked: The instance.

Examples using del_proj:

Find ECG artifacts¶

drop_channels(ch_names)[source]¶

Drop channel(s).

Parameters

ch_namesiterable or str: Iterable (e.g. list) of channel name(s) or channel name to remove.

Returns

instinstance of Raw, Epochs, or Evoked: The modified instance.

See also

reorder_channels
pick_channels
pick_types

Notes

New in version 0.9.0.

Examples using drop_channels:

Compare the different ICA algorithms in MNE¶

property filenames¶: The filenames used.

filter(l_freq, h_freq, picks=None, filter_length='auto', l_trans_bandwidth='auto', h_trans_bandwidth='auto', n_jobs=1, method='fir', iir_params=None, phase='zero', fir_window='hamming', fir_design='firwin', skip_by_annotation=('edge', 'bad_acq_skip'), pad='reflect_limited', verbose=None)[source]¶

Filter a subset of channels.

Parameters

l_freqfloat | None

For FIR filters, the lower pass-band edge; for IIR filters, the lower cutoff frequency. If None the data are only low-passed.

h_freqfloat | None

For FIR filters, the upper pass-band edge; for IIR filters, the upper cutoff frequency. If None the data are only high-passed.

picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all data channels.

filter_lengthstr | int

Length of the FIR filter to use (if applicable):

‘auto’ (default): The filter length is chosen based on the size of the transition regions (6.6 times the reciprocal of the shortest transition band for fir_window=’hamming’ and fir_design=”firwin2”, and half that for “firwin”).
str: A human-readable time in units of “s” or “ms” (e.g., “10s” or “5500ms”) will be converted to that number of samples if phase="zero", or the shortest power-of-two length at least that duration for phase="zero-double".
int: Specified length in samples. For fir_design=”firwin”, this should not be used.

l_trans_bandwidthfloat | str

Width of the transition band at the low cut-off frequency in Hz (high pass or cutoff 1 in bandpass). Can be “auto” (default) to use a multiple of l_freq:

min(max(l_freq * 0.25, 2), l_freq)

Only used for method='fir'.

h_trans_bandwidthfloat | str

Width of the transition band at the high cut-off frequency in Hz (low pass or cutoff 2 in bandpass). Can be “auto” (default in 0.14) to use a multiple of h_freq:

min(max(h_freq * 0.25, 2.), info['sfreq'] / 2. - h_freq)

Only used for method='fir'.

n_jobsint | str

Number of jobs to run in parallel. Can be ‘cuda’ if cupy is installed properly and method=’fir’.

methodstr

‘fir’ will use overlap-add FIR filtering, ‘iir’ will use IIR forward-backward filtering (via filtfilt).

iir_paramsdict | None

Dictionary of parameters to use for IIR filtering. If iir_params is None and method=”iir”, 4th order Butterworth will be used. For more information, see mne.filter.construct_iir_filter().

phasestr

Phase of the filter, only used if method='fir'. Symmetric linear-phase FIR filters are constructed, and if phase='zero' (default), the delay of this filter is compensated for, making it non-causal. If phase=='zero-double', then this filter is applied twice, once forward, and once backward (also making it non-causal). If ‘minimum’, then a minimum-phase filter will be constricted and applied, which is causal but has weaker stop-band suppression.

New in version 0.13.

fir_windowstr

The window to use in FIR design, can be “hamming” (default), “hann” (default in 0.13), or “blackman”.

New in version 0.15.

fir_designstr

Can be “firwin” (default) to use scipy.signal.firwin(), or “firwin2” to use scipy.signal.firwin2(). “firwin” uses a time-domain design technique that generally gives improved attenuation using fewer samples than “firwin2”.

New in version 0.15.

skip_by_annotationstr | list of str

If a string (or list of str), any annotation segment that begins with the given string will not be included in filtering, and segments on either side of the given excluded annotated segment will be filtered separately (i.e., as independent signals). The default (('edge', 'bad_acq_skip') will separately filter any segments that were concatenated by mne.concatenate_raws() or mne.io.Raw.append(), or separated during acquisition. To disable, provide an empty list. Only used if inst is raw.

New in version 0.16..

padstr

The type of padding to use. Supports all numpy.pad() mode options. Can also be “reflect_limited”, which pads with a reflected version of each vector mirrored on the first and last values of the vector, followed by zeros. Only used for method='fir'.

verbosebool, str, int, or None

If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

instinstance of Epochs, Evoked, or Raw: The filtered data.

See also

mne.filter.create_filter
mne.Evoked.savgol_filter
mne.io.Raw.notch_filter
mne.io.Raw.resample
mne.filter.create_filter
mne.filter.filter_data
mne.filter.construct_iir_filter

Notes

Applies a zero-phase low-pass, high-pass, band-pass, or band-stop filter to the channels selected by picks. The data are modified inplace.

The object has to have the data loaded e.g. with preload=True or self.load_data().

l_freq and h_freq are the frequencies below which and above which, respectively, to filter out of the data. Thus the uses are:

l_freq < h_freq: band-pass filter

l_freq > h_freq: band-stop filter

l_freq is not None and h_freq is None: high-pass filter

l_freq is None and h_freq is not None: low-pass filter

self.info['lowpass'] and self.info['highpass'] are only updated with picks=None.

Note

If n_jobs > 1, more memory is required as len(picks) * n_times additional time points need to be temporaily stored in memory.

For more information, see the tutorials Background information on filtering and Filtering and resampling data and mne.filter.create_filter().

New in version 0.15.

Examples using filter:

Plot sensor denoising using oversampled temporal projection¶

Compute ICA components on epochs¶

XDAWN Denoising¶

Whitening evoked data with a noise covariance¶

Plot custom topographies for MEG sensors¶

Regression on continuous data (rER[P/F])¶

Decoding source space data¶

Decoding sensor space data with generalization across time and conditions¶

Analysis of evoked response using ICA and PCA reduction techniques¶

XDAWN Decoding From EEG data¶

Compute effect-matched-spatial filtering (EMS)¶

Signal-space separation (SSS) and Maxwell filtering¶

Spatiotemporal permutation F-test on full sensor data¶

Brainstorm auditory tutorial dataset¶

Background information on filtering¶

property first_samp¶: The first data sample.

property first_time¶: The first time point (including first_samp but not meas_date).

fix_mag_coil_types()[source]¶

Fix Elekta magnetometer coil types.

Returns

rawinstance of Raw: The raw object. Operates in place.

Notes

This function changes magnetometer coil types 3022 (T1: SQ20483N) and 3023 (T2: SQ20483-A) to 3024 (T3: SQ20950N) in the channel definition records in the info structure.

Neuromag Vectorview systems can contain magnetometers with two different coil sizes (3022 and 3023 vs. 3024). The systems incorporating coils of type 3024 were introduced last and are used at the majority of MEG sites. At some sites with 3024 magnetometers, the data files have still defined the magnetometers to be of type 3022 to ensure compatibility with older versions of Neuromag software. In the MNE software as well as in the present version of Neuromag software coil type 3024 is fully supported. Therefore, it is now safe to upgrade the data files to use the true coil type.

Note

The effect of the difference between the coil sizes on the current estimates computed by the MNE software is very small. Therefore the use of mne_fix_mag_coil_types is not mandatory.

get_channel_types(picks=None, unique=False, only_data_chs=False)[source]¶

Get a list of channel type for each channel.

Parameters

picksstr | list | slice | None: Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels.
uniquebool: Whether to return only unique channel types. Default is False.
only_data_chsbool: Whether to ignore non-data channels. Default is False.

Returns

channel_typeslist: The channel types.

Examples using get_channel_types:

The Info data structure¶

get_data(picks=None, start=0, stop=None, reject_by_annotation=None, return_times=False, verbose=None)[source]¶

Get data in the given range.

Parameters

picksstr | list | slice | None: Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels.
startint: The first sample to include. Defaults to 0.
stopint | None: End sample (first not to include). If None (default), the end of the data is used.
reject_by_annotationNone | ‘omit’ | ‘NaN’: Whether to reject by annotation. If None (default), no rejection is done. If ‘omit’, segments annotated with description starting with ‘bad’ are omitted. If ‘NaN’, the bad samples are filled with NaNs.
return_timesbool: Whether to return times as well. Defaults to False.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

datandarray, shape (n_channels, n_times): Copy of the data in the given range.
timesndarray, shape (n_times,): Times associated with the data samples. Only returned if return_times=True.

Notes

New in version 0.14.0.

Examples using get_data:

get_montage()[source]¶

Get a DigMontage from instance.

Returns

montageNone | str | DigMontage: A montage containing channel positions. If str or DigMontage is specified, the channel info will be updated with the channel positions. Default is None. See also the documentation of mne.channels.DigMontage for more information.

interpolate_bads(reset_bads=True, mode='accurate', origin='auto', method=None, verbose=None)[source]¶

Interpolate bad MEG and EEG channels.

Operates in place.

Parameters

reset_badsbool

If True, remove the bads from info.

modestr

Either 'accurate' or 'fast', determines the quality of the Legendre polynomial expansion used for interpolation of channels using the minimum-norm method.

originarray_like, shape (3,) | str

Origin of the sphere in the head coordinate frame and in meters. Can be 'auto' (default), which means a head-digitization-based origin fit.

New in version 0.17.

methoddict

Method to use for each channel type. Currently only the key “eeg” has multiple options:

"spline" (default)
Use spherical spline interpolation.
"MNE"
Use minimum-norm projection to a sphere and back. This is the method used for MEG channels.

The value for “meg” is “MNE”, and the value for “fnirs” is “nearest”. The default (None) is thus an alias for:

method=dict(meg="MNE", eeg="spline", fnirs="nearest")

New in version 0.21.

verbosebool, str, int, or None

If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

instinstance of Raw, Epochs, or Evoked: The modified instance.

Notes

New in version 0.9.0.

Examples using interpolate_bads:

Compute evoked ERS source power using DICS, LCMV beamformer, and dSPM¶

property last_samp¶: The last data sample.

load_bad_channels(bad_file=None, force=False)[source]¶

Mark channels as bad from a text file.

This function operates mostly in the style of the C function mne_mark_bad_channels. Each line in the text file will be interpreted as a name of a bad channel.

Parameters

bad_filestr: File name of the text file containing bad channels If bad_file = None, bad channels are cleared, but this is more easily done directly as raw.info[‘bads’] = [].
forcebool: Whether or not to force bad channel marking (of those that exist) if channels are not found, instead of raising an error.

load_data(verbose=None)[source]¶

Load raw data.

Parameters

verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

rawinstance of Raw: The raw object with data.

Notes

This function will load raw data if it was not already preloaded. If data were already preloaded, it will do nothing.

New in version 0.10.0.

Examples using load_data:

Overview of MEG/EEG analysis with MNE-Python¶

Compute the power spectral density of raw data¶

property n_times¶: Number of time points.

notch_filter(freqs, picks=None, filter_length='auto', notch_widths=None, trans_bandwidth=1.0, n_jobs=1, method='fir', iir_params=None, mt_bandwidth=None, p_value=0.05, phase='zero', fir_window='hamming', fir_design='firwin', pad='reflect_limited', verbose=None)[source]¶

Notch filter a subset of channels.

Parameters

freqsfloat | array of float | None

Specific frequencies to filter out from data, e.g., np.arange(60, 241, 60) in the US or np.arange(50, 251, 50) in Europe. None can only be used with the mode ‘spectrum_fit’, where an F test is used to find sinusoidal components.

picksstr | list | slice | None

filter_lengthstr | int

Length of the FIR filter to use (if applicable):

‘auto’ (default): The filter length is chosen based on the size of the transition regions (6.6 times the reciprocal of the shortest transition band for fir_window=’hamming’ and fir_design=”firwin2”, and half that for “firwin”).
str: A human-readable time in units of “s” or “ms” (e.g., “10s” or “5500ms”) will be converted to that number of samples if phase="zero", or the shortest power-of-two length at least that duration for phase="zero-double".
int: Specified length in samples. For fir_design=”firwin”, this should not be used.

When method=='spectrum_fit', this sets the effective window duration over which fits are computed. See mne.filter.create_filter() for options. Longer window lengths will give more stable frequency estimates, but require (potentially much) more processing and are not able to adapt as well to non-stationarities.

The default in 0.21 is None, but this will change to '10s' in 0.22.

notch_widthsfloat | array of float | None

Width of each stop band (centred at each freq in freqs) in Hz. If None, freqs / 200 is used.

trans_bandwidthfloat

Width of the transition band in Hz. Only used for method='fir'.

n_jobsint | str

Number of jobs to run in parallel. Can be ‘cuda’ if cupy is installed properly and method=’fir’.

methodstr

‘fir’ will use overlap-add FIR filtering, ‘iir’ will use IIR forward-backward filtering (via filtfilt).

iir_paramsdict | None

Dictionary of parameters to use for IIR filtering. If iir_params is None and method=”iir”, 4th order Butterworth will be used. For more information, see mne.filter.construct_iir_filter().

mt_bandwidthfloat | None

The bandwidth of the multitaper windowing function in Hz. Only used in ‘spectrum_fit’ mode.

p_valuefloat

P-value to use in F-test thresholding to determine significant sinusoidal components to remove when method=’spectrum_fit’ and freqs=None. Note that this will be Bonferroni corrected for the number of frequencies, so large p-values may be justified.

phasestr

New in version 0.13.

fir_windowstr

The window to use in FIR design, can be “hamming” (default), “hann” (default in 0.13), or “blackman”.

New in version 0.15.

fir_designstr

New in version 0.15.

padstr

New in version 0.15.

verbosebool, str, int, or None

If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

rawinstance of Raw: The raw instance with filtered data.

See also

mne.filter.notch_filter
mne.io.Raw.filter

Notes

Applies a zero-phase notch filter to the channels selected by “picks”. By default the data of the Raw object is modified inplace.

The Raw object has to have the data loaded e.g. with preload=True or self.load_data().

Note

If n_jobs > 1, more memory is required as len(picks) * n_times additional time points need to be temporaily stored in memory.

For details, see mne.filter.notch_filter().

Examples using notch_filter:

Signal-space separation (SSS) and Maxwell filtering¶

Brainstorm auditory tutorial dataset¶

pick(picks, exclude=())[source]¶

Pick a subset of channels.

Parameters

picksstr | list | slice | None: Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels.
excludelist | str: Set of channels to exclude, only used when picking based on types (e.g., exclude=”bads” when picks=”meg”).

Returns

instinstance of Raw, Epochs, or Evoked: The modified instance.

Examples using pick:

Signal-space separation (SSS) and Maxwell filtering¶

pick_channels(ch_names, ordered=False)[source]¶

Pick some channels.

Parameters

ch_nameslist: The list of channels to select.
orderedbool: If True (default False), ensure that the order of the channels in the modified instance matches the order of ch_names.

New in version 0.20.0.

Returns

instinstance of Raw, Epochs, or Evoked: The modified instance.

See also

drop_channels
pick_types
reorder_channels

Notes

The channel names given are assumed to be a set, i.e. the order does not matter. The original order of the channels is preserved. You can use reorder_channels to set channel order if necessary.

New in version 0.9.0.

Examples using pick_channels:

Time-frequency beamforming using DICS¶

Transform EEG data using current source density (CSD)¶

pick_types(meg=None, eeg=False, stim=False, eog=False, ecg=False, emg=False, ref_meg='auto', misc=False, resp=False, chpi=False, exci=False, ias=False, syst=False, seeg=False, dipole=False, gof=False, bio=False, ecog=False, fnirs=False, csd=False, include=(), exclude='bads', selection=None, verbose=None)[source]¶

Pick some channels by type and names.

Parameters

megbool | str: If True include MEG channels. If string it can be ‘mag’, ‘grad’, ‘planar1’ or ‘planar2’ to select only magnetometers, all gradiometers, or a specific type of gradiometer.
eegbool: If True include EEG channels.
stimbool: If True include stimulus channels.
eogbool: If True include EOG channels.
ecgbool: If True include ECG channels.
emgbool: If True include EMG channels.
ref_megbool | str: If True include CTF / 4D reference channels. If ‘auto’, reference channels are included if compensations are present and meg is not False. Can also be the string options for the meg parameter.
miscbool: If True include miscellaneous analog channels.
respbool: If True include response-trigger channel. For some MEG systems this is separate from the stim channel.
chpibool: If True include continuous HPI coil channels.
excibool: Flux excitation channel used to be a stimulus channel.
iasbool: Internal Active Shielding data (maybe on Triux only).
systbool: System status channel information (on Triux systems only).
seegbool: Stereotactic EEG channels.
dipolebool: Dipole time course channels.
gofbool: Dipole goodness of fit channels.
biobool: Bio channels.
ecogbool: Electrocorticography channels.
fnirsbool | str: Functional near-infrared spectroscopy channels. If True include all fNIRS channels. If False (default) include none. If string it can be ‘hbo’ (to include channels measuring oxyhemoglobin) or ‘hbr’ (to include channels measuring deoxyhemoglobin).
csdbool: EEG-CSD channels.
includelist of str: List of additional channels to include. If empty do not include any.
excludelist of str | str: List of channels to exclude. If ‘bads’ (default), exclude channels in info['bads'].
selectionlist of str: Restrict sensor channels (MEG, EEG) to this list of channel names.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

instinstance of Raw, Epochs, or Evoked: The modified instance.

See also

pick_channels

Notes

New in version 0.9.0.

Examples using pick_types:

Compute ICA components on epochs¶

Regression on continuous data (rER[P/F])¶

Compute cross-talk functions for LCMV beamformers¶

EEG processing and Event Related Potentials (ERPs)¶

EEG source localization given electrode locations on an MRI¶

plot(events=None, duration=10.0, start=0.0, n_channels=20, bgcolor='w', color=None, bad_color=(0.8, 0.8, 0.8), event_color='cyan', scalings=None, remove_dc=True, order=None, show_options=False, title=None, show=True, block=False, highpass=None, lowpass=None, filtorder=4, clipping=3.0, show_first_samp=False, proj=True, group_by='type', butterfly=False, decim='auto', noise_cov=None, event_id=None, show_scrollbars=True, show_scalebars=True, verbose=None)[source]¶

Plot raw data.

Parameters

eventsarray | None

Events to show with vertical bars.

durationfloat

Time window (s) to plot. The lesser of this value and the duration of the raw file will be used.

startfloat

Initial time to show (can be changed dynamically once plotted). If show_first_samp is True, then it is taken relative to raw.first_samp.

n_channelsint

Number of channels to plot at once. Defaults to 20. The lesser of n_channels and len(raw.ch_names) will be shown. Has no effect if order is ‘position’, ‘selection’ or ‘butterfly’.

bgcolorcolor object

Color of the background.

colordict | color object | None

Color for the data traces. If None, defaults to:

dict(mag='darkblue', grad='b', eeg='k', eog='k', ecg='m',
     emg='k', ref_meg='steelblue', misc='k', stim='k',
     resp='k', chpi='k')

bad_colorcolor object

Color to make bad channels.

event_colorcolor object | dict

Color to use for events. Can also be a dict with {event_number: color} pairings. Use event_number==-1 for any event numbers in the events list that are not in the dictionary.

scalingsdict | None

Scaling factors for the traces. If any fields in scalings are ‘auto’, the scaling factor is set to match the 99.5th percentile of a subset of the corresponding data. If scalings == ‘auto’, all scalings fields are set to ‘auto’. If any fields are ‘auto’ and data is not preloaded, a subset of times up to 100mb will be loaded. If None, defaults to:

dict(mag=1e-12, grad=4e-11, eeg=20e-6, eog=150e-6, ecg=5e-4,
     emg=1e-3, ref_meg=1e-12, misc=1e-3, stim=1,
     resp=1, chpi=1e-4, whitened=1e2)

remove_dcbool

If True remove DC component when plotting data.

orderarray of int | None

Order in which to plot data. If the array is shorter than the number of channels, only the given channels are plotted. If None (default), all channels are plotted. If group_by is 'position' or 'selection', the order parameter is used only for selecting the channels to be plotted.

show_optionsbool

If True, a dialog for options related to projection is shown.

titlestr | None

The title of the window. If None, and either the filename of the raw object or ‘<unknown>’ will be displayed as title.

showbool

Show figure if True.

blockbool

Whether to halt program execution until the figure is closed. Useful for setting bad channels on the fly by clicking on a line. May not work on all systems / platforms.

highpassfloat | None

Highpass to apply when displaying data.

lowpassfloat | None

Lowpass to apply when displaying data. If highpass > lowpass, a bandstop rather than bandpass filter will be applied.

filtorderint

Filtering order. 0 will use FIR filtering with MNE defaults. Other values will construct an IIR filter of the given order and apply it with filtfilt() (making the effective order twice filtorder). Filtering may produce some edge artifacts (at the left and right edges) of the signals during display.

Changed in version 0.18: Support for filtorder=0 to use FIR filtering.

clippingstr | float | None

If None, channels are allowed to exceed their designated bounds in the plot. If “clamp”, then values are clamped to the appropriate range for display, creating step-like artifacts. If “transparent”, then excessive values are not shown, creating gaps in the traces. If float, clipping occurs for values beyond the clipping multiple of their dedicated range, so clipping=1. is an alias for clipping='transparent'.

Changed in version 0.21: Support for float, and default changed from None to 1.5.

show_first_sampbool

If True, show time axis relative to the raw.first_samp.

projbool

Whether to apply projectors prior to plotting (default is True). Individual projectors can be enabled/disabled interactively (see Notes). This argument only affects the plot; use raw.apply_proj() to modify the data stored in the Raw object.

group_bystr

How to group channels. 'type' groups by channel type, 'original' plots in the order of ch_names, 'selection' uses Elekta’s channel groupings (only works for Neuromag data), 'position' groups the channels by the positions of the sensors. 'selection' and 'position' modes allow custom selections by using lasso selector on the topomap. Pressing ctrl key while selecting allows appending to the current selection. Channels marked as bad appear with red edges on the topomap. 'type' and 'original' groups the channels by type in butterfly mode whereas 'selection' and 'position' use regional grouping. 'type' and 'original' modes are overridden with order keyword.

butterflybool

Whether to start in butterfly mode. Defaults to False.

decimint | ‘auto’

Amount to decimate the data during display for speed purposes. You should only decimate if the data are sufficiently low-passed, otherwise aliasing can occur. The ‘auto’ mode (default) uses the decimation that results in a sampling rate least three times larger than min(info['lowpass'], lowpass) (e.g., a 40 Hz lowpass will result in at least a 120 Hz displayed sample rate).

noise_covinstance of Covariance | str | None

Noise covariance used to whiten the data while plotting. Whitened data channels are scaled by scalings['whitened'], and their channel names are shown in italic. Can be a string to load a covariance from disk. See also mne.Evoked.plot_white() for additional inspection of noise covariance properties when whitening evoked data. For data processed with SSS, the effective dependence between magnetometers and gradiometers may introduce differences in scaling, consider using mne.Evoked.plot_white().

New in version 0.16.0.

event_iddict | None

Event IDs used to show at event markers (default None shows the event numbers).

New in version 0.16.0.

show_scrollbarsbool

Whether to show scrollbars when the plot is initialized. Can be toggled after initialization by pressing z (“zen mode”) while the plot window is focused. Default is True.

New in version 0.19.0.

show_scalebarsbool

Whether or not to show the scale bars. Defaults to True.

New in version 0.20.0.

verbosebool, str, int, or None

If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only.

Returns

figinstance of matplotlib.figure.Figure: Raw traces.

Notes

The arrow keys (up/down/left/right) can typically be used to navigate between channels and time ranges, but this depends on the backend matplotlib is configured to use (e.g., mpl.use(‘TkAgg’) should work). The left/right arrows will scroll by 25% of duration, whereas shift+left/shift+right will scroll by 100% of duration. The scaling can be adjusted with - and + (or =) keys. The viewport dimensions can be adjusted with page up/page down and home/end keys. Full screen mode can be toggled with the F11 key. To mark or un-mark a channel as bad, click on a channel label or a channel trace. The changes will be reflected immediately in the raw object’s raw.info['bads'] entry.

If projectors are present, a button labelled “Proj” in the lower right corner of the plot window opens a secondary control window, which allows enabling/disabling specific projectors individually. This provides a means of interactively observing how each projector would affect the raw data if it were applied.

Annotation mode is toggled by pressing ‘a’, butterfly mode by pressing ‘b’, and whitening mode (when noise_cov is not None) by pressing ‘w’. By default, the channel means are removed when remove_dc is set to True. This flag can be toggled by pressing ‘d’.

Examples using plot:

Reading and writing raw files¶

Transform EEG data using current source density (CSD)¶

Maxwell filter data with movement compensation¶

Plot sensor denoising using oversampled temporal projection¶

Overview of MEG/EEG analysis with MNE-Python¶

Working with events¶

Rejecting bad data spans¶

Brainstorm Elekta phantom dataset tutorial¶

Plotting whitened data¶

plot_projs_topomap(ch_type=None, cmap=None, sensors=True, colorbar=False, res=64, size=1, show=True, outlines='head', contours=6, image_interp='bilinear', axes=None, vlim=(None, None), sphere=None, extrapolate='auto', border='mean')[source]¶

Plot SSP vector.

Parameters

The channel type to plot. For ‘grad’, the gradiometers are collec- ted in pairs and the RMS for each pair is plotted. If None (default), it will return all channel types present. If a list of ch_types is provided, it will return multiple figures.

cmapmatplotlib colormap | (colormap, bool) | ‘interactive’ | None

Colormap to use. If tuple, the first value indicates the colormap to use and the second value is a boolean defining interactivity. In interactive mode (only works if colorbar=True) the colors are adjustable by clicking and dragging the colorbar with left and right mouse button. Left mouse button moves the scale up and down and right mouse button adjusts the range. Hitting space bar resets the range. Up and down arrows can be used to change the colormap. If None (default), ‘Reds’ is used for all positive data, otherwise defaults to ‘RdBu_r’. If ‘interactive’, translates to (None, True).

sensorsbool | str

Add markers for sensor locations to the plot. Accepts matplotlib plot format string (e.g., ‘r+’ for red plusses). If True, a circle will be used (via .add_artist). Defaults to True.

colorbarbool

Plot a colorbar.

resint

The resolution of the topomap image (n pixels along each side).

sizescalar

Side length of the topomaps in inches (only applies when plotting multiple topomaps at a time).

showbool

Show figure if True.

outlines‘head’ | ‘skirt’ | dict | None

The outlines to be drawn. If ‘head’, the default head scheme will be drawn. If ‘skirt’ the head scheme will be drawn, but sensors are allowed to be plotted outside of the head circle. If dict, each key refers to a tuple of x and y positions, the values in ‘mask_pos’ will serve as image mask. Alternatively, a matplotlib patch object can be passed for advanced masking options, either directly or as a function that returns patches (required for multi-axis plots). If None, nothing will be drawn. Defaults to ‘head’.

contoursint | array of float

The number of contour lines to draw. If 0, no contours will be drawn. When an integer, matplotlib ticker locator is used to find suitable values for the contour thresholds (may sometimes be inaccurate, use array for accuracy). If an array, the values represent the levels for the contours. Defaults to 6.

image_interpstr

The image interpolation to be used. All matplotlib options are accepted.

axesinstance of Axes | list | None

The axes to plot to. If list, the list must be a list of Axes of the same length as the number of projectors. If instance of Axes, there must be only one projector. Defaults to None.

vlimtuple of length 2 | ‘joint’

Colormap limits to use. If tuple, specifies the lower and upper bounds of the colormap (in that order); providing None for either of these will set the corresponding boundary at the min/max of the data (separately for each projector). The keyword value 'joint' will compute the colormap limits jointly across all provided projectors of the same channel type, using the min/max of the projector data. If vlim is 'joint', info must not be None. Defaults to (None, None).

spherefloat | array_like | str | None

The sphere parameters to use for the cartoon head. Can be array-like of shape (4,) to give the X/Y/Z origin and radius in meters, or a single float to give the radius (origin assumed 0, 0, 0). Can also be a spherical ConductorModel, which will use the origin and radius. Can be “auto” to use a digitization-based fit. Can also be None (default) to use ‘auto’ when enough extra digitization points are available, and 0.095 otherwise. Currently the head radius does not affect plotting.

New in version 0.20.

extrapolatestr

Options:

'box'
Extrapolate to four points placed to form a square encompassing all data points, where each side of the square is three times the range of the data in the respective dimension.
'local' (default)
Extrapolate only to nearby points (approximately to points closer than median inter-electrode distance). This will also set the mask to be polygonal based on the convex hull of the sensors.
'head'
Extrapolate out to the edges of the clipping circle. This will be on the head circle when the sensors are contained within the head circle, but it can extend beyond the head when sensors are plotted outside the head circle.

Changed in version 0.21:

The default was changed to 'local'
'local' was changed to use a convex hull mask
'head' was changed to extrapolate out to the clipping circle.

New in version 0.20.

borderfloat | ‘mean’

Value to extrapolate to on the topomap borders. If 'mean' (default), then each extrapolated point has the average value of its neighbours.

New in version 0.20.

Returns

figinstance of Figure: Figure distributing one image per channel across sensor topography.

Examples using plot_projs_topomap:

Read and visualize projections (SSP and other)¶

Transform EEG data using current source density (CSD)¶

plot_psd(fmin=0, fmax=inf, tmin=None, tmax=None, proj=False, n_fft=None, n_overlap=0, reject_by_annotation=True, picks=None, ax=None, color='black', xscale='linear', area_mode='std', area_alpha=0.33, dB=True, estimate='auto', show=True, n_jobs=1, average=False, line_alpha=None, spatial_colors=True, sphere=None, verbose=None)[source]¶

Plot the power spectral density across channels.

Different channel types are drawn in sub-plots. When the data have been processed with a bandpass, lowpass or highpass filter, dashed lines indicate the boundaries of the filter (–). The line noise frequency is also indicated with a dashed line (-.).

Parameters

fminfloat

Start frequency to consider.

fmaxfloat

End frequency to consider.

tminfloat | None

Start time to consider.

tmaxfloat | None

End time to consider.

projbool

Apply projection.

n_fftint | None

Number of points to use in Welch FFT calculations. Default is None, which uses the minimum of 2048 and the number of time points.

n_overlapint

The number of points of overlap between blocks. The default value is 0 (no overlap).

reject_by_annotationbool

Whether to omit bad segments from the data before fitting. If True (default), annotated segments whose description begins with 'bad' are omitted. If False, no rejection based on annotations is performed.

Has no effect if inst is not a mne.io.Raw object.

picksstr | list | slice | None

axinstance of Axes | None

Axes to plot into. If None, axes will be created.

colorstr | tuple

A matplotlib-compatible color to use. Has no effect when spatial_colors=True.

xscalestr

Can be ‘linear’ (default) or ‘log’.

area_modestr | None

Mode for plotting area. If ‘std’, the mean +/- 1 STD (across channels) will be plotted. If ‘range’, the min and max (across channels) will be plotted. Bad channels will be excluded from these calculations. If None, no area will be plotted. If average=False, no area is plotted.

area_alphafloat

Alpha for the area.

dBbool

Plot Power Spectral Density (PSD), in units (amplitude**2/Hz (dB)) if dB=True, and estimate='power' or estimate='auto'. Plot PSD in units (amplitude**2/Hz) if dB=False and, estimate='power'. Plot Amplitude Spectral Density (ASD), in units (amplitude/sqrt(Hz)), if dB=False and estimate='amplitude' or estimate='auto'. Plot ASD, in units (amplitude/sqrt(Hz) (db)), if dB=True and estimate='amplitude'.

estimatestr, {‘auto’, ‘power’, ‘amplitude’}

Can be “power” for power spectral density (PSD), “amplitude” for amplitude spectrum density (ASD), or “auto” (default), which uses “power” when dB is True and “amplitude” otherwise.

showbool

Show figure if True.

n_jobsint

The number of jobs to run in parallel (default 1). Requires the joblib package.

averagebool

If False, the PSDs of all channels is displayed. No averaging is done and parameters area_mode and area_alpha are ignored. When False, it is possible to paint an area (hold left mouse button and drag) to plot a topomap.

line_alphafloat | None

Alpha for the PSD line. Can be None (default) to use 1.0 when average=True and 0.1 when average=False.

spatial_colorsbool

Whether to use spatial colors. Only used when average=False.

spherefloat | array_like | str | None

New in version 0.20.

verbosebool, str, int, or None

If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only.

Returns

figinstance of Figure: Figure with frequency spectra of the data channels.

Examples using plot_psd:

Show noise levels from empty room data¶

Compute the power spectral density of raw data¶

Overview of MEG/EEG analysis with MNE-Python¶

Rejecting bad data spans¶

Extracting and visualizing subject head movement¶

Brainstorm Elekta phantom dataset tutorial¶

plot_psd_topo(tmin=0.0, tmax=None, fmin=0, fmax=100, proj=False, n_fft=2048, n_overlap=0, layout=None, color='w', fig_facecolor='k', axis_facecolor='k', dB=True, show=True, block=False, n_jobs=1, axes=None, verbose=None)[source]¶

Plot channel-wise frequency spectra as topography.

Parameters

tminfloat: Start time for calculations. Defaults to zero.
tmaxfloat | None: End time for calculations. If None (default), the end of data is used.
fminfloat: Start frequency to consider. Defaults to zero.
fmaxfloat: End frequency to consider. Defaults to 100.
projbool: Apply projection. Defaults to False.
n_fftint: Number of points to use in Welch FFT calculations. Defaults to 2048.
n_overlapint: The number of points of overlap between blocks. Defaults to 0 (no overlap).
layoutinstance of Layout | None: Layout instance specifying sensor positions (does not need to be specified for Neuromag data). If None (default), the correct layout is inferred from the data.
colorstr | tuple: A matplotlib-compatible color to use for the curves. Defaults to white.
fig_facecolorstr | tuple: A matplotlib-compatible color to use for the figure background. Defaults to black.
axis_facecolorstr | tuple: A matplotlib-compatible color to use for the axis background. Defaults to black.
dBbool: If True, transform data to decibels. Defaults to True.
showbool: Show figure if True. Defaults to True.
blockbool: Whether to halt program execution until the figure is closed. May not work on all systems / platforms. Defaults to False.
n_jobsint: The number of jobs to run in parallel (default 1). Requires the joblib package.
axesinstance of matplotlib Axes | None: Axes to plot into. If None, axes will be created.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only.

Returns

figinstance of matplotlib.figure.Figure: Figure distributing one image per channel across sensor topography.

Examples using plot_psd_topo:

Working with sensor locations¶

plot_sensors(kind='topomap', ch_type=None, title=None, show_names=False, ch_groups=None, to_sphere=True, axes=None, block=False, show=True, sphere=None, verbose=None)[source]¶

Plot sensor positions.

Parameters

kindstr: Whether to plot the sensors as 3d, topomap or as an interactive sensor selection dialog. Available options ‘topomap’, ‘3d’, ‘select’. If ‘select’, a set of channels can be selected interactively by using lasso selector or clicking while holding control key. The selected channels are returned along with the figure instance. Defaults to ‘topomap’.
ch_typeNone | str: The channel type to plot. Available options ‘mag’, ‘grad’, ‘eeg’, ‘seeg’, ‘ecog’, ‘all’. If 'all', all the available mag, grad, eeg, seeg and ecog channels are plotted. If None (default), then channels are chosen in the order given above.
titlestr | None: Title for the figure. If None (default), equals to 'Sensor positions (%s)' % ch_type.
show_namesbool | array of str: Whether to display all channel names. If an array, only the channel names in the array are shown. Defaults to False.
ch_groups‘position’ | array of shape (n_ch_groups, n_picks) | None: Channel groups for coloring the sensors. If None (default), default coloring scheme is used. If ‘position’, the sensors are divided into 8 regions. See order kwarg of mne.viz.plot_raw(). If array, the channels are divided by picks given in the array.

New in version 0.13.0.
to_spherebool: Whether to project the 3d locations to a sphere. When False, the sensor array appears similar as to looking downwards straight above the subject’s head. Has no effect when kind=’3d’. Defaults to True.

New in version 0.14.0.
axesinstance of Axes | instance of Axes3D | None: Axes to draw the sensors to. If kind='3d', axes must be an instance of Axes3D. If None (default), a new axes will be created.

New in version 0.13.0.
blockbool: Whether to halt program execution until the figure is closed. Defaults to False.

New in version 0.13.0.
showbool: Show figure if True. Defaults to True.
spherefloat | array_like | str | None: The sphere parameters to use for the cartoon head. Can be array-like of shape (4,) to give the X/Y/Z origin and radius in meters, or a single float to give the radius (origin assumed 0, 0, 0). Can also be a spherical ConductorModel, which will use the origin and radius. Can be “auto” to use a digitization-based fit. Can also be None (default) to use ‘auto’ when enough extra digitization points are available, and 0.095 otherwise. Currently the head radius does not affect plotting.

New in version 0.20.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

figinstance of Figure: Figure containing the sensor topography.
selectionlist: A list of selected channels. Only returned if kind=='select'.

See also

mne.viz.plot_layout

Notes

This function plots the sensor locations from the info structure using matplotlib. For drawing the sensors using mayavi see mne.viz.plot_alignment().

New in version 0.12.0.

Examples using plot_sensors:

EEG processing and Event Related Potentials (ERPs)¶

EEG source localization given electrode locations on an MRI¶

property proj¶: Whether or not projections are active.

rename_channels(mapping)[source]¶

Rename channels.

Parameters

mappingdict | callable(): A dictionary mapping the old channel to a new channel name e.g. {‘EEG061’ : ‘EEG161’}. Can also be a callable function that takes and returns a string.

Changed in version 0.10.0: Support for a callable function.

Returns

instinstance of Raw | Epochs | Evoked: The instance (modified in place).

Changed in version 0.20: Return the instance.

Notes

New in version 0.9.0.

Examples using rename_channels:

EEG processing and Event Related Potentials (ERPs)¶

reorder_channels(ch_names)[source]¶

Reorder channels.

Parameters

ch_nameslist: The desired channel order.

Returns

instinstance of Raw, Epochs, or Evoked: The modified instance.

See also

drop_channels
pick_types
pick_channels

Notes

Channel names must be unique. Channels that are not in ch_names are dropped.

New in version 0.16.0.

Examples using reorder_channels:

Reading and writing raw files¶

resample(sfreq, npad='auto', window='boxcar', stim_picks=None, n_jobs=1, events=None, pad='reflect_limited', verbose=None)[source]¶

Resample all channels.

Warning

The intended purpose of this function is primarily to speed up computations (e.g., projection calculation) when precise timing of events is not required, as downsampling raw data effectively jitters trigger timings. It is generally recommended not to epoch downsampled data, but instead epoch and then downsample, as epoching downsampled data jitters triggers. For more, see this illustrative gist.

If resampling the continuous data is desired, it is recommended to construct events using the original data. The event onsets can be jointly resampled with the raw data using the ‘events’ parameter (a resampled copy is returned).

Parameters

sfreqfloat: New sample rate to use.
npadint | str: Amount to pad the start and end of the data. Can also be “auto” to use a padding that will result in a power-of-two size (can be much faster).
windowstr | tuple: Frequency-domain window to use in resampling. See scipy.signal.resample().
stim_pickslist of int | None: Stim channels. These channels are simply subsampled or supersampled (without applying any filtering). This reduces resampling artifacts in stim channels, but may lead to missing triggers. If None, stim channels are automatically chosen using mne.pick_types().
n_jobsint | str: Number of jobs to run in parallel. Can be ‘cuda’ if cupy is installed properly.
events2D array, shape (n_events, 3) | None: An optional event matrix. When specified, the onsets of the events are resampled jointly with the data. NB: The input events are not modified, but a new array is returned with the raw instead.
padstr: The type of padding to use. Supports all numpy.pad() mode options. Can also be “reflect_limited”, which pads with a reflected version of each vector mirrored on the first and last values of the vector, followed by zeros. Only used for method='fir'. The default is 'reflect_limited'.

New in version 0.15.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

rawinstance of Raw: The resampled version of the raw object.
eventsarray, shape (n_events, 3) | None: If events are jointly resampled, these are returned with the raw.

See also

mne.io.Raw.filter
mne.Epochs.resample

Notes

For some data, it may be more accurate to use npad=0 to reduce artifacts. This is dataset dependent – check your data!

For optimum performance and to make use of n_jobs > 1, the raw object has to have the data loaded e.g. with preload=True or self.load_data(), but this increases memory requirements. The resulting raw object will have the data loaded into memory.

save(fname, picks=None, tmin=0, tmax=None, buffer_size_sec=None, drop_small_buffer=False, proj=False, fmt='single', overwrite=False, split_size='2GB', split_naming='neuromag', verbose=None)[source]¶

Save raw data to file.

Parameters

fnamestr: File name of the new dataset. This has to be a new filename unless data have been preloaded. Filenames should end with raw.fif, raw.fif.gz, raw_sss.fif, raw_sss.fif.gz, raw_tsss.fif, raw_tsss.fif.gz, or _meg.fif.
picksstr | list | slice | None: Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels.
tminfloat: Start time of the raw data to use in seconds (must be >= 0).
tmaxfloat: End time of the raw data to use in seconds (cannot exceed data duration).
buffer_size_secfloat | None: Size of data chunks in seconds. If None (default), the buffer size of the original file is used.
drop_small_bufferbool: Drop or not the last buffer. It is required by maxfilter (SSS) that only accepts raw files with buffers of the same size.
projbool: If True the data is saved with the projections applied (active).

Note

If apply_proj() was used to apply the projections, the projectons will be active even if proj is False.
fmt‘single’ | ‘double’ | ‘int’ | ‘short’: Format to use to save raw data. Valid options are ‘double’, ‘single’, ‘int’, and ‘short’ for 64- or 32-bit float, or 32- or 16-bit integers, respectively. It is strongly recommended to use ‘single’, as this is backward-compatible, and is standard for maintaining precision. Note that using ‘short’ or ‘int’ may result in loss of precision, complex data cannot be saved as ‘short’, and neither complex data types nor real data stored as ‘double’ can be loaded with the MNE command-line tools. See raw.orig_format to determine the format the original data were stored in.
overwritebool: If True, the destination file (if it exists) will be overwritten. If False (default), an error will be raised if the file exists. To overwrite original file (the same one that was loaded), data must be preloaded upon reading.
split_sizestr | int: Large raw files are automatically split into multiple pieces. This parameter specifies the maximum size of each piece. If the parameter is an integer, it specifies the size in Bytes. It is also possible to pass a human-readable string, e.g., 100MB.

Note

Due to FIFF file limitations, the maximum split size is 2GB.
split_naming{‘neuromag’ | ‘bids’}: Add the filename partition with the appropriate naming schema.

New in version 0.17.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Notes

If Raw is a concatenation of several raw files, be warned that only the measurement information from the first raw file is stored. This likely means that certain operations with external tools may not work properly on a saved concatenated file (e.g., probably some or all forms of SSS). It is recommended not to concatenate and then save raw files for this reason.

Examples using save:

savgol_filter(h_freq, verbose=None)[source]¶

Filter the data using Savitzky-Golay polynomial method.

Parameters

h_freqfloat: Approximate high cut-off frequency in Hz. Note that this is not an exact cutoff, since Savitzky-Golay filtering 1 is done using polynomial fits instead of FIR/IIR filtering. This parameter is thus used to determine the length of the window over which a 5th-order polynomial smoothing is used.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

instinstance of Epochs or Evoked: The object with the filtering applied.

See also

mne.io.Raw.filter

Notes

For Savitzky-Golay low-pass approximation, see:

https://gist.github.com/larsoner/bbac101d50176611136b

New in version 0.9.0.

References

1: Abraham Savitzky and Marcel J. E. Golay. Smoothing and differentiation of data by simplified least squares procedures. Analytical Chemistry, 36(8):1627–1639, 1964. doi:10.1021/ac60214a047.

Examples

>>> import mne
>>> from os import path as op
>>> evoked_fname = op.join(mne.datasets.sample.data_path(), 'MEG', 'sample', 'sample_audvis-ave.fif')  
>>> evoked = mne.read_evokeds(evoked_fname, baseline=(None, 0))[0]  
>>> evoked.savgol_filter(10.)  # low-pass at around 10 Hz 
>>> evoked.plot()  

set_annotations(annotations, emit_warning=True)[source]¶

Setter for annotations.

This setter checks if they are inside the data range.

Parameters

annotationsinstance of mne.Annotations | None: Annotations to set. If None, the annotations is defined but empty.
emit_warningbool: Whether to emit warnings when limiting or omitting annotations.

Returns

selfinstance of Raw: The raw object with annotations.

Examples using set_annotations:

Rejecting bad data spans¶

set_channel_types(mapping, verbose=None)[source]¶

Define the sensor type of channels.

Parameters

mappingdict: A dictionary mapping a channel to a sensor type (str), e.g., {'EEG061': 'eog'}.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

instinstance of Raw | Epochs | Evoked: The instance (modified in place).

Changed in version 0.20: Return the instance.

Notes

The following sensor types are accepted:

ecg, eeg, emg, eog, exci, ias, misc, resp, seeg, stim, syst, ecog, hbo, hbr, fnirs_cw_amplitude, fnirs_od

New in version 0.9.0.

Examples using set_channel_types:

EEG processing and Event Related Potentials (ERPs)¶

set_eeg_reference(ref_channels='average', projection=False, ch_type='auto', forward=None, verbose=None)[source]¶

Specify which reference to use for EEG data.

Use this function to explicitly specify the desired reference for EEG. This can be either an existing electrode or a new virtual channel. This function will re-reference the data according to the desired reference.

Parameters

ref_channelslist of str | str

Can be:

The name(s) of the channel(s) used to construct the reference.
'average' to apply an average reference (default)
'REST' to use the Reference Electrode Standardization Technique infinity reference 2.
An empty list, in which case MNE will not attempt any re-referencing of the data

projectionbool

If ref_channels='average' this argument specifies if the average reference should be computed as a projection (True) or not (False; default). If projection=True, the average reference is added as a projection and is not applied to the data (it can be applied afterwards with the apply_proj method). If projection=False, the average reference is directly applied to the data. If ref_channels is not 'average', projection must be set to False (the default in this case).

ch_type‘auto’ | ‘eeg’ | ‘ecog’ | ‘seeg’

The name of the channel type to apply the reference to. If ‘auto’, the first channel type of eeg, ecog or seeg that is found (in that order) will be selected.

New in version 0.19.

forwardinstance of Forward | None

Forward solution to use. Only used with ref_channels='REST'.

New in version 0.21.

verbosebool, str, int, or None

If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

instinstance of Raw | Epochs | Evoked: Data with EEG channels re-referenced. If ref_channels='average' and projection=True a projection will be added instead of directly re-referencing the data.

See also

mne.set_bipolar_reference: Convenience function for creating bipolar references.

Notes

Some common referencing schemes and the corresponding value for the ref_channels parameter:

Average reference:
A new virtual reference electrode is created by averaging the current EEG signal by setting ref_channels='average'. Bad EEG channels are automatically excluded if they are properly set in info['bads'].
A single electrode:
Set ref_channels to a list containing the name of the channel that will act as the new reference, for example ref_channels=['Cz'].
The mean of multiple electrodes:
A new virtual reference electrode is created by computing the average of the current EEG signal recorded from two or more selected channels. Set ref_channels to a list of channel names, indicating which channels to use. For example, to apply an average mastoid reference, when using the 10-20 naming scheme, set ref_channels=['M1', 'M2'].
REST
The given EEG electrodes are referenced to a point at infinity using the lead fields in forward, which helps standardize the signals.

If a reference is requested that is not the average reference, this function removes any pre-existing average reference projections.
During source localization, the EEG signal should have an average reference.
In order to apply a reference, the data must be preloaded. This is not necessary if ref_channels='average' and projection=True.
For an average or REST reference, bad EEG channels are automatically excluded if they are properly set in info['bads'].

New in version 0.9.0.

References

2: D. Yao. A method to standardize a reference of scalp EEG recordings to a point at infinity. Physiological Measurement, 22(4):693–711, November 2001. doi:10.1088/0967-3334/22/4/305.

Examples using set_eeg_reference:

Generate simulated raw data¶

Transform EEG data using current source density (CSD)¶

Re-referencing the EEG signal¶

Compute sLORETA inverse solution on raw data¶

EEG processing and Event Related Potentials (ERPs)¶

Computing a covariance matrix¶

EEG source localization given electrode locations on an MRI¶

Corrupt known signal with point spread¶

set_meas_date(meas_date)[source]¶

Set the measurement start date.

Parameters

meas_datedatetime | float | tuple | None: The new measurement date. If datetime object, it must be timezone-aware and in UTC. A tuple of (seconds, microseconds) or float (alias for (meas_date, 0)) can also be passed and a datetime object will be automatically created. If None, will remove the time reference.

Returns

instinstance of Raw | Epochs | Evoked: The modified raw instance. Operates in place.

See also

mne.io.Raw.anonymize

Notes

If you want to remove all time references in the file, call mne.io.anonymize_info(inst.info) after calling inst.set_meas_date(None).

New in version 0.20.

set_montage(montage, match_case=True, on_missing='raise', verbose=None)[source]¶

Set EEG sensor configuration and head digitization.

Parameters

montageNone | str | DigMontage: A montage containing channel positions. If str or DigMontage is specified, the channel info will be updated with the channel positions. Default is None. See also the documentation of mne.channels.DigMontage for more information.
match_casebool: If True (default), channel name matching will be case sensitive.

New in version 0.20.
on_missingstr: Can be 'raise' (default) to raise an error, 'warn' to emit a warning, or 'ignore' to ignore when channels have missing coordinates.

New in version 0.20.1.
verbosebool, str, int, or None: If not None, override default verbose level (see mne.verbose() and Logging documentation for more). If used, it should be passed as a keyword-argument only. Defaults to self.verbose.

Returns

instinstance of Raw | Epochs | Evoked: The instance.

Notes

Operates in place.

Examples using set_montage:

Working with sensor locations¶

Importing data from EEG devices¶

EEG source localization given electrode locations on an MRI¶

time_as_index(times, use_rounding=False, origin=None)[source]¶

Convert time to indices.

Parameters

timeslist-like | float | int: List of numbers or a number representing points in time.
use_roundingbool: If True, use rounding (instead of truncation) when converting times to indices. This can help avoid non-unique indices.
origindatetime | float | int | None: Time reference for times. If None, times are assumed to be relative to first_samp.

New in version 0.17.0.

Returns

indexndarray: Indices relative to first_samp corresponding to the times supplied.

Examples using time_as_index:

Reading and writing raw files¶

Compute sLORETA inverse solution on raw data¶