mne.Epochs#

class mne.Epochs(raw, events, event_id=None, tmin=- 0.2, tmax=0.5, baseline=(None, 0), picks=None, preload=False, reject=None, flat=None, proj=True, decim=1, reject_tmin=None, reject_tmax=None, detrend=None, on_missing='raise', reject_by_annotation=True, metadata=None, event_repeated='error', verbose=None)[source]#

Epochs extracted from a Raw instance.

Parameters
rawRaw object

An instance of Raw.

eventsarray of int, shape (n_events, 3)

The array of events. The first column contains the event time in samples, with first_samp included. The third column contains the event id. If some events don’t match the events of interest as specified by event_id, they will be marked as IGNORED in the drop log.

event_idint | list of int | dict | None

The id of the events to consider. If dict, the keys can later be used to access associated events. Example: dict(auditory=1, visual=3). If int, a dict will be created with the id as string. If a list, all events with the IDs specified in the list are used. If None, all events will be used and a dict is created with string integer names corresponding to the event id integers.

tmin, tmaxfloat

Start and end time of the epochs in seconds, relative to the time-locked event. The closest or matching samples corresponding to the start and end time are included. Defaults to -0.2 and 0.5, respectively.

baselineNone | tuple of length 2

The time interval to consider as “baseline” when applying baseline correction. If None, do not apply baseline correction. If a tuple (a, b), the interval is between a and b (in seconds), including the endpoints. If a is None, the beginning of the data is used; and if b is None, it is set to the end of the interval. If (None, None), the entire time interval is used.

Note

The baseline (a, b) includes both endpoints, i.e. all timepoints t such that a <= t <= b.

Correction is applied to each epoch and channel individually in the following way:

  1. Calculate the mean signal of the baseline period.

  2. Subtract this mean from the entire epoch.

Defaults to (None, 0), i.e. beginning of the the data until time point zero.

picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

preloadbool

Load all epochs from disk when creating the object or wait before accessing each epoch (more memory efficient but can be slower).

rejectdict | None

Reject epochs based on maximum peak-to-peak signal amplitude (PTP), i.e. the absolute difference between the lowest and the highest signal value. In each individual epoch, the PTP is calculated for every channel. If the PTP of any one channel exceeds the rejection threshold, the respective epoch will be dropped.

The dictionary keys correspond to the different channel types; valid keys can be any channel type present in the object.

Example:

reject = dict(grad=4000e-13,  # unit: T / m (gradiometers)
              mag=4e-12,      # unit: T (magnetometers)
              eeg=40e-6,      # unit: V (EEG channels)
              eog=250e-6      # unit: V (EOG channels)
              )

Note

Since rejection is based on a signal difference calculated for each channel separately, applying baseline correction does not affect the rejection procedure, as the difference will be preserved.

Note

To constrain the time period used for estimation of signal quality, pass the reject_tmin and reject_tmax parameters.

If reject is None (default), no rejection is performed.

flatdict | None

Reject epochs based on minimum peak-to-peak signal amplitude (PTP). Valid keys can be any channel type present in the object. The values are floats that set the minimum acceptable PTP. If the PTP is smaller than this threshold, the epoch will be dropped. If None then no rejection is performed based on flatness of the signal.

Note

To constrain the time period used for estimation of signal quality, pass the reject_tmin and reject_tmax parameters.

projbool | ‘delayed’

Apply SSP projection vectors. If proj is ‘delayed’ and reject is not None the single epochs will be projected before the rejection decision, but used in unprojected state if they are kept. This way deciding which projection vectors are good can be postponed to the evoked stage without resulting in lower epoch counts and without producing results different from early SSP application given comparable parameters. Note that in this case baselining, detrending and temporal decimation will be postponed. If proj is False no projections will be applied which is the recommended value if SSPs are not used for cleaning the data.

decimint

Factor by which to subsample the data.

Warning

Low-pass filtering is not performed, this simply selects every Nth sample (where N is the value passed to decim), i.e., it compresses the signal (see Notes). If the data are not properly filtered, aliasing artifacts may occur.

reject_tmin, reject_tmaxfloat | None

Start and end of the time window used to reject epochs based on peak-to-peak (PTP) amplitudes as specified via reject and flat. The default None corresponds to the first and last time points of the epochs, respectively.

Note

This parameter controls the time period used in conjunction with both, reject and flat.

detrendint | None

If 0 or 1, the data channels (MEG and EEG) will be detrended when loaded. 0 is a constant (DC) detrend, 1 is a linear detrend. None is no detrending. Note that detrending is performed before baseline correction. If no DC offset is preferred (zeroth order detrending), either turn off baseline correction, as this may introduce a DC shift, or set baseline correction to use the entire time interval (will yield equivalent results but be slower).

on_missing‘raise’ | ‘warn’ | ‘ignore’

What to do if one or several event ids are not found in the recording. Valid keys are ‘raise’ | ‘warn’ | ‘ignore’ Default is 'raise'. If 'warn', it will proceed but warn; if 'ignore', it will proceed silently.

Note

If none of the event ids are found in the data, an error will be automatically generated irrespective of this parameter.

reject_by_annotationbool

Whether to reject based on annotations. If True (default), epochs overlapping with segments whose description begins with 'bad' are rejected. If False, no rejection based on annotations is performed.

metadatainstance of pandas.DataFrame | None

A pandas.DataFrame specifying metadata about each epoch. If given, len(metadata) must equal len(events). The DataFrame may only contain values of type (str | int | float | bool). If metadata is given, then pandas-style queries may be used to select subsets of data, see mne.Epochs.__getitem__(). When a subset of the epochs is created in this (or any other supported) manner, the metadata object is subsetted accordingly, and the row indices will be modified to match epochs.selection.

New in version 0.16.

event_repeatedstr

How to handle duplicates in events[:, 0]. Can be 'error' (default), to raise an error, ‘drop’ to only retain the row occurring first in the events, or 'merge' to combine the coinciding events (=duplicates) into a new event (see Notes for details).

New in version 0.19.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Notes

When accessing data, Epochs are detrended, baseline-corrected, and decimated, then projectors are (optionally) applied.

For indexing and slicing using epochs[...], see mne.Epochs.__getitem__().

All methods for iteration over objects (using mne.Epochs.__iter__(), mne.Epochs.iter_evoked() or mne.Epochs.next()) use the same internal state.

If event_repeated is set to 'merge', the coinciding events (duplicates) will be merged into a single event_id and assigned a new id_number as:

event_id['{event_id_1}/{event_id_2}/...'] = new_id_number

For example with the event_id {'aud': 1, 'vis': 2} and the events [[0, 0, 1], [0, 0, 2]], the “merge” behavior will update both event_id and events to be: {'aud/vis': 3} and [[0, 0, 3]] respectively.

There is limited support for Annotations in the Epochs class. Currently annotations that are present in the Raw object will be preserved in the resulting Epochs object, but:

  1. It is not yet possible to add annotations to the Epochs object programmatically (via code) or interactively (through the plot window)

  2. Concatenating Epochs objects that contain annotations is not supported, and any annotations will be dropped when concatenating.

  3. Annotations will be lost on save.

Attributes
infomne.Info

The mne.Info object with information about the sensors and methods of measurement.

event_iddict

Names of conditions corresponding to event_ids.

ch_nameslist of str

Channel names.

selectionarray

List of indices of selected events (not dropped or ignored etc.). For example, if the original event array had 4 events and the second event has been dropped, this attribute would be np.array([0, 2, 3]).

preloadbool

Indicates whether epochs are in memory.

drop_logtuple of tuple

A tuple of the same length as the event array used to initialize the Epochs object. If the i-th original event is still part of the selection, drop_log[i] will be an empty tuple; otherwise it will be a tuple of the reasons the event is not longer in the selection, e.g.:

  • ‘IGNORED’

    If it isn’t part of the current subset defined by the user

  • ‘NO_DATA’ or ‘TOO_SHORT’

    If epoch didn’t contain enough data names of channels that exceeded the amplitude threshold

  • ‘EQUALIZED_COUNTS’

    See equalize_event_counts()

  • ‘USER’

    For user-defined reasons (see drop()).

filenamestr

The filename.

timesndarray

Time vector in seconds.

Methods

__contains__(ch_type)

Check channel type membership.

__getitem__(item)

Return an Epochs object with a copied subset of epochs.

__iter__()

Facilitate iteration over epochs.

__len__()

Return the number of epochs.

add_annotations_to_metadata([overwrite])

Add raw annotations into the Epochs metadata data frame.

add_channels(add_list[, force_update_info])

Append new channels to the instance.

add_proj(projs[, remove_existing, verbose])

Add SSP projection vectors.

add_reference_channels(ref_channels)

Add reference channels to data that consists of all zeros.

anonymize([daysback, keep_his, verbose])

Anonymize measurement information in place.

apply_baseline([baseline, verbose])

Baseline correct epochs.

apply_function(fun[, picks, dtype, n_jobs, ...])

Apply a function to a subset of channels.

apply_hilbert([picks, envelope, n_jobs, ...])

Compute analytic signal or envelope for a subset of channels.

apply_proj([verbose])

Apply the signal space projection (SSP) operators to the data.

as_type([ch_type, mode])

Compute virtual epochs using interpolated fields.

average([picks, method, by_event_type])

Compute an average over epochs.

copy()

Return copy of Epochs instance.

crop([tmin, tmax, include_tmax, verbose])

Crop a time interval from the epochs.

decimate(decim[, offset, verbose])

Decimate the epochs.

del_proj([idx])

Remove SSP projection vector.

drop(indices[, reason, verbose])

Drop epochs based on indices or boolean mask.

drop_bad([reject, flat, verbose])

Drop bad epochs without retaining the epochs data.

drop_channels(ch_names)

Drop channel(s).

drop_log_stats([ignore])

Compute the channel stats based on a drop_log from Epochs.

equalize_event_counts([event_ids, method])

Equalize the number of trials in each condition.

export(fname[, fmt, overwrite, verbose])

Export Epochs to external formats.

filter(l_freq, h_freq[, picks, ...])

Filter a subset of channels.

get_annotations_per_epoch()

Get a list of annotations that occur during each epoch.

get_channel_types([picks, unique, only_data_chs])

Get a list of channel type for each channel.

get_data([picks, item, units, tmin, tmax])

Get all epochs as a 3D array.

get_montage()

Get a DigMontage from instance.

interpolate_bads([reset_bads, mode, origin, ...])

Interpolate bad MEG and EEG channels.

iter_evoked([copy])

Iterate over epochs as a sequence of Evoked objects.

load_data()

Load the data if not already preloaded.

next([return_event_id])

Iterate over epoch data.

pick(picks[, exclude, verbose])

Pick a subset of channels.

pick_channels(ch_names[, ordered])

Pick some channels.

pick_types([meg, eeg, stim, eog, ecg, emg, ...])

Pick some channels by type and names.

plot([picks, scalings, n_epochs, ...])

Visualize epochs.

plot_drop_log([threshold, n_max_plot, ...])

Show the channel stats based on a drop_log from Epochs.

plot_image([picks, sigma, vmin, vmax, ...])

Plot Event Related Potential / Fields image.

plot_projs_topomap([ch_type, cmap, sensors, ...])

Plot SSP vector.

plot_psd([fmin, fmax, tmin, tmax, proj, ...])

Plot the power spectral density across channels.

plot_psd_topomap([bands, tmin, tmax, proj, ...])

Plot the topomap of the power spectral density across epochs.

plot_sensors([kind, ch_type, title, ...])

Plot sensor positions.

plot_topo_image([layout, sigma, vmin, vmax, ...])

Plot Event Related Potential / Fields image on topographies.

rename_channels(mapping[, allow_duplicates, ...])

Rename channels.

reorder_channels(ch_names)

Reorder channels.

resample(sfreq[, npad, window, n_jobs, pad, ...])

Resample data.

reset_drop_log_selection()

Reset the drop_log and selection entries.

save(fname[, split_size, fmt, overwrite, ...])

Save epochs in a fif file.

savgol_filter(h_freq[, verbose])

Filter the data using Savitzky-Golay polynomial method.

set_annotations(annotations[, on_missing, ...])

Setter for Epoch annotations from Raw.

set_channel_types(mapping[, verbose])

Define the sensor type of channels.

set_eeg_reference([ref_channels, ...])

Specify which reference to use for EEG data.

set_meas_date(meas_date)

Set the measurement start date.

set_montage(montage[, match_case, ...])

Set EEG/sEEG/ECoG/DBS/fNIRS channel positions and digitization points.

shift_time(tshift[, relative])

Shift time scale in epoched or evoked data.

standard_error([picks, by_event_type])

Compute standard error over epochs.

subtract_evoked([evoked])

Subtract an evoked response from each epoch.

time_as_index(times[, use_rounding])

Convert time to indices.

to_data_frame([picks, index, scalings, ...])

Export data in tabular structure as a pandas DataFrame.

__contains__(ch_type)[source]#

Check channel type membership.

Parameters
ch_typestr

Channel type to check for. Can be e.g. ‘meg’, ‘eeg’, ‘stim’, etc.

Returns
inbool

Whether or not the instance contains the given channel type.

Examples

Channel type membership can be tested as:

>>> 'meg' in inst  
True
>>> 'seeg' in inst  
False
__getitem__(item)[source]#

Return an Epochs object with a copied subset of epochs.

Parameters
itemslice, array-like, str, or list

See below for use cases.

Returns
epochsinstance of Epochs

See below for use cases.

Notes

Epochs can be accessed as epochs[...] in several ways:

  1. Integer or slice: epochs[idx] will return an Epochs object with a subset of epochs chosen by index (supports single index and Python-style slicing).

  2. String: epochs['name'] will return an Epochs object comprising only the epochs labeled 'name' (i.e., epochs created around events with the label 'name').

    If there are no epochs labeled 'name' but there are epochs labeled with /-separated tags (e.g. 'name/left', 'name/right'), then epochs['name'] will select the epochs with labels that contain that tag (e.g., epochs['left'] selects epochs labeled 'audio/left' and 'visual/left', but not 'audio_left').

    If multiple tags are provided as a single string (e.g., epochs['name_1/name_2']), this selects epochs containing all provided tags. For example, epochs['audio/left'] selects 'audio/left' and 'audio/quiet/left', but not 'audio/right'. Note that tag-based selection is insensitive to order: tags like 'audio/left' and 'left/audio' will be treated the same way when selecting via tag.

  3. List of strings: epochs[['name_1', 'name_2', ... ]] will return an Epochs object comprising epochs that match any of the provided names (i.e., the list of names is treated as an inclusive-or condition). If none of the provided names match any epoch labels, a KeyError will be raised.

    If epoch labels are /-separated tags, then providing multiple tags as separate list entries will likewise act as an inclusive-or filter. For example, epochs[['audio', 'left']] would select 'audio/left', 'audio/right', and 'visual/left', but not 'visual/right'.

  4. Pandas query: epochs['pandas query'] will return an Epochs object with a subset of epochs (and matching metadata) selected by the query called with self.metadata.eval, e.g.:

    epochs["col_a > 2 and col_b == 'foo'"]
    

    would return all epochs whose associated col_a metadata was greater than two, and whose col_b metadata was the string ‘foo’. Query-based indexing only works if Pandas is installed and self.metadata is a pandas.DataFrame.

    New in version 0.16.

__iter__()[source]#

Facilitate iteration over epochs.

This method resets the object iteration state to the first epoch.

Notes

This enables the use of this Python pattern:

>>> for epoch in epochs:  
>>>     print(epoch)  

Where epoch is given by successive outputs of mne.Epochs.next().

__len__()[source]#

Return the number of epochs.

Returns
n_epochsint

The number of remaining epochs.

Notes

This function only works if bad epochs have been dropped.

Examples

This can be used as:

>>> epochs.drop_bad()  
>>> len(epochs)  
43
>>> len(epochs.events)  
43
add_annotations_to_metadata(overwrite=False)[source]#

Add raw annotations into the Epochs metadata data frame.

Adds three columns to the metadata consisting of a list in each row: - annot_onset: the onset of each Annotation within the Epoch relative to the start time of the Epoch (in seconds). - annot_duration: the duration of each Annotation within the Epoch in seconds. - annot_description: the free-form text description of each Annotation.

Parameters
overwritebool

Whether to overwrite existing columns in metadata or not. Default is False.

Returns
selfinstance of Epochs

The modified instance (instance is also modified inplace).

Notes

New in version 1.0.

add_channels(add_list, force_update_info=False)[source]#

Append new channels to the instance.

Parameters
add_listlist

A list of objects to append to self. Must contain all the same type as the current object.

force_update_infobool

If True, force the info for objects to be appended to match the values in self. This should generally only be used when adding stim channels for which important metadata won’t be overwritten.

New in version 0.12.

Returns
instinstance of Raw, Epochs, or Evoked

The modified instance.

See also

drop_channels

Notes

If self is a Raw instance that has been preloaded into a numpy.memmap instance, the memmap will be resized.

add_proj(projs, remove_existing=False, verbose=None)[source]#

Add SSP projection vectors.

Parameters
projslist

List with projection vectors.

remove_existingbool

Remove the projection vectors currently in the file.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
selfinstance of Raw | Epochs | Evoked

The data container.

Examples using add_proj:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Visualizing epoched data

Visualizing epoched data

Visualizing epoched data
add_reference_channels(ref_channels)[source]#

Add reference channels to data that consists of all zeros.

Adds reference channels to data that were not included during recording. This is useful when you need to re-reference your data to different channels. These added channels will consist of all zeros.

Parameters
ref_channelsstr | list of str

Name of the electrode(s) which served as the reference in the recording. If a name is provided, a corresponding channel is added and its data is set to 0. This is useful for later re-referencing.

Returns
instinstance of Raw | Epochs | Evoked

The modified instance.

anonymize(daysback=None, keep_his=False, verbose=None)[source]#

Anonymize measurement information in place.

Parameters
daysbackint | None

Number of days to subtract from all dates. If None (default), the acquisition date, info['meas_date'], will be set to January 1ˢᵗ, 2000. This parameter is ignored if info['meas_date'] is None (i.e., no acquisition date has been set).

keep_hisbool

If True, his_id of subject_info will not be overwritten. Defaults to False.

Warning

This could mean that info is not fully anonymized. Use with caution.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Raw | Epochs | Evoked

The modified instance.

Notes

Removes potentially identifying information if it exists in info. Specifically for each of the following we use:

  • meas_date, file_id, meas_id

    A default value, or as specified by daysback.

  • subject_info

    Default values, except for ‘birthday’ which is adjusted to maintain the subject age.

  • experimenter, proj_name, description

    Default strings.

  • utc_offset

    None.

  • proj_id

    Zeros.

  • proc_history

    Dates use the meas_date logic, and experimenter a default string.

  • helium_info, device_info

    Dates use the meas_date logic, meta info uses defaults.

If info['meas_date'] is None, it will remain None during processing the above fields.

Operates in place.

New in version 0.13.0.

apply_baseline(baseline=(None, 0), *, verbose=None)[source]#

Baseline correct epochs.

Parameters
baselineNone | tuple of length 2

The time interval to consider as “baseline” when applying baseline correction. If None, do not apply baseline correction. If a tuple (a, b), the interval is between a and b (in seconds), including the endpoints. If a is None, the beginning of the data is used; and if b is None, it is set to the end of the interval. If (None, None), the entire time interval is used.

Note

The baseline (a, b) includes both endpoints, i.e. all timepoints t such that a <= t <= b.

Correction is applied to each epoch and channel individually in the following way:

  1. Calculate the mean signal of the baseline period.

  2. Subtract this mean from the entire epoch.

Defaults to (None, 0), i.e. beginning of the the data until time point zero.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
epochsinstance of Epochs

The baseline-corrected Epochs object.

Notes

Baseline correction can be done multiple times, but can never be reverted once the data has been loaded.

New in version 0.10.0.

Examples using apply_baseline:

Repairing artifacts with regression

Repairing artifacts with regression

Repairing artifacts with regression
apply_function(fun, picks=None, dtype=None, n_jobs=1, channel_wise=True, verbose=None, **kwargs)[source]#

Apply a function to a subset of channels.

The function fun is applied to the channels defined in picks. The epochs object’s data is modified in-place. If the function returns a different data type (e.g. numpy.complex128) it must be specified using the dtype parameter, which causes the data type of all the data to change (even if the function is only applied to channels in picks). The object has to have the data loaded e.g. with preload=True or self.load_data().

Note

If n_jobs > 1, more memory is required as len(picks) * n_times additional time points need to be temporarily stored in memory.

Note

If the data type changes (dtype != None), more memory is required since the original and the converted data needs to be stored in memory.

Parameters
funcallable()

A function to be applied to the channels. The first argument of fun has to be a timeseries (numpy.ndarray). The function must operate on an array of shape (n_times,) if channel_wise=True and (len(picks), n_times) otherwise. The function must return an ndarray shaped like its input.

picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all data channels (excluding reference MEG channels). Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

dtypenumpy.dtype

Data type to use after applying the function. If None (default) the data type is not modified.

n_jobsint

The number of jobs to run in parallel (default 1). If -1, it is set to the number of CPU cores. Requires the joblib package.

channel_wisebool

Whether to apply the function to each channel in each epoch individually. If False, the function will be applied to all epochs and channels at once. Default True.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

**kwargsdict

Additional keyword arguments to pass to fun.

Returns
selfinstance of Epochs

The epochs object with transformed data.

apply_hilbert(picks=None, envelope=False, n_jobs=1, n_fft='auto', verbose=None)[source]#

Compute analytic signal or envelope for a subset of channels.

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all data channels (excluding reference MEG channels). Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

envelopebool

Compute the envelope signal of each channel. Default False. See Notes.

n_jobsint

The number of jobs to run in parallel (default 1). If -1, it is set to the number of CPU cores. Requires the joblib package.

n_fftint | None | str

Points to use in the FFT for Hilbert transformation. The signal will be padded with zeros before computing Hilbert, then cut back to original length. If None, n == self.n_times. If ‘auto’, the next highest fast FFT length will be use.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
selfinstance of Raw, Epochs, or Evoked

The raw object with transformed data.

Notes

Parameters

If envelope=False, the analytic signal for the channels defined in picks is computed and the data of the Raw object is converted to a complex representation (the analytic signal is complex valued).

If envelope=True, the absolute value of the analytic signal for the channels defined in picks is computed, resulting in the envelope signal.

If envelope=False, more memory is required since the original raw data as well as the analytic signal have temporarily to be stored in memory. If n_jobs > 1, more memory is required as len(picks) * n_times additional time points need to be temporaily stored in memory.

Also note that the n_fft parameter will allow you to pad the signal with zeros before performing the Hilbert transform. This padding is cut off, but it may result in a slightly different result (particularly around the edges). Use at your own risk.

Analytic signal

The analytic signal “x_a(t)” of “x(t)” is:

x_a = F^{-1}(F(x) 2U) = x + i y

where “F” is the Fourier transform, “U” the unit step function, and “y” the Hilbert transform of “x”. One usage of the analytic signal is the computation of the envelope signal, which is given by “e(t) = abs(x_a(t))”. Due to the linearity of Hilbert transform and the MNE inverse solution, the enevlope in source space can be obtained by computing the analytic signal in sensor space, applying the MNE inverse, and computing the envelope in source space.

apply_proj(verbose=None)[source]#

Apply the signal space projection (SSP) operators to the data.

Parameters
verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
selfinstance of Raw | Epochs | Evoked

The instance.

Notes

Once the projectors have been applied, they can no longer be removed. It is usually not recommended to apply the projectors at too early stages, as they are applied automatically later on (e.g. when computing inverse solutions). Hint: using the copy method individual projection vectors can be tested without affecting the original data. With evoked data, consider the following example:

projs_a = mne.read_proj('proj_a.fif')
projs_b = mne.read_proj('proj_b.fif')
# add the first, copy, apply and see ...
evoked.add_proj(a).copy().apply_proj().plot()
# add the second, copy, apply and see ...
evoked.add_proj(b).copy().apply_proj().plot()
# drop the first and see again
evoked.copy().del_proj(0).apply_proj().plot()
evoked.apply_proj()  # finally keep both

Examples using apply_proj:

Visualizing epoched data

Visualizing epoched data

Visualizing epoched data
as_type(ch_type='grad', mode='fast')[source]#

Compute virtual epochs using interpolated fields.

Warning

Using virtual epochs to compute inverse can yield unexpected results. The virtual channels have '_v' appended at the end of the names to emphasize that the data contained in them are interpolated.

Parameters
ch_typestr

The destination channel type. It can be ‘mag’ or ‘grad’.

modestr

Either 'accurate' or 'fast', determines the quality of the Legendre polynomial expansion used. 'fast' should be sufficient for most applications.

Returns
epochsinstance of mne.EpochsArray

The transformed epochs object containing only virtual channels.

Notes

This method returns a copy and does not modify the data it operates on. It also returns an EpochsArray instance.

New in version 0.20.0.

average(picks=None, method='mean', by_event_type=False)[source]#

Compute an average over epochs.

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all data channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

methodstr | callable()

How to combine the data. If “mean”/”median”, the mean/median are returned. Otherwise, must be a callable which, when passed an array of shape (n_epochs, n_channels, n_time) returns an array of shape (n_channels, n_time). Note that due to file type limitations, the kind for all these will be “average”.

by_event_typebool

When False (the default) all epochs are processed together and a single Evoked object is returned. When True, epochs are first grouped by event type (as specified using the event_id parameter) and a list is returned containing a separate Evoked object for each event type. The .comment attribute is set to the label of the event type.

New in version 0.24.0.

Returns
evokedinstance of Evoked | list of Evoked

The averaged epochs. When by_event_type=True was specified, a list is returned containing a separate Evoked object for each event type. The list has the same order as the event types as specified in the event_id dictionary.

Notes

Computes an average of all epochs in the instance, even if they correspond to different conditions. To average by condition, do epochs[condition].average() for each condition separately.

When picks is None and epochs contain only ICA channels, no channels are selected, resulting in an error. This is because ICA channels are not considered data channels (they are of misc type) and only data channels are selected when picks is None.

The method parameter allows e.g. robust averaging. For example, one could do:

>>> from scipy.stats import trim_mean  
>>> trim = lambda x: trim_mean(x, 0.1, axis=0)  
>>> epochs.average(method=trim)  

This would compute the trimmed mean.

Examples using average:

Overview of MEG/EEG analysis with MNE-Python

Overview of MEG/EEG analysis with MNE-Python

Overview of MEG/EEG analysis with MNE-Python
Getting started with mne.Report

Getting started with mne.Report

Getting started with mne.Report
Overview of artifact detection

Overview of artifact detection

Overview of artifact detection
Rejecting bad data spans and breaks

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks
Repairing artifacts with regression

Repairing artifacts with regression

Repairing artifacts with regression
Repairing artifacts with SSP

Repairing artifacts with SSP

Repairing artifacts with SSP
The Evoked data structure: evoked/averaged data

The Evoked data structure: evoked/averaged data

The Evoked data structure: evoked/averaged data
Plotting whitened data

Plotting whitened data

Plotting whitened data
Computing a covariance matrix

Computing a covariance matrix

Computing a covariance matrix
4D Neuroimaging/BTi phantom dataset tutorial

4D Neuroimaging/BTi phantom dataset tutorial

4D Neuroimaging/BTi phantom dataset tutorial
Non-parametric 1 sample cluster statistic on single trial power

Non-parametric 1 sample cluster statistic on single trial power

Non-parametric 1 sample cluster statistic on single trial power
Non-parametric between conditions cluster statistic on single trial power

Non-parametric between conditions cluster statistic on single trial power

Non-parametric between conditions cluster statistic on single trial power
Permutation t-test on source data with spatio-temporal clustering

Permutation t-test on source data with spatio-temporal clustering

Permutation t-test on source data with spatio-temporal clustering
Working with sEEG data

Working with sEEG data

Working with sEEG data
Corrupt known signal with point spread

Corrupt known signal with point spread

Corrupt known signal with point spread
Getting averaging info from .fif files

Getting averaging info from .fif files

Getting averaging info from .fif files
Generate simulated raw data

Generate simulated raw data

Generate simulated raw data
Generate simulated source data

Generate simulated source data

Generate simulated source data
Maxwell filter data with movement compensation

Maxwell filter data with movement compensation

Maxwell filter data with movement compensation
Whitening evoked data with a noise covariance

Whitening evoked data with a noise covariance

Whitening evoked data with a noise covariance
Compute MNE-dSPM inverse solution on single epochs

Compute MNE-dSPM inverse solution on single epochs

Compute MNE-dSPM inverse solution on single epochs
Compute source power estimate by projecting the covariance with MNE

Compute source power estimate by projecting the covariance with MNE

Compute source power estimate by projecting the covariance with MNE
Brainstorm raw (median nerve) dataset

Brainstorm raw (median nerve) dataset

Brainstorm raw (median nerve) dataset
property ch_names#

Channel names.

property compensation_grade#

The current gradient compensation grade.

copy()[source]#

Return copy of Epochs instance.

Returns
epochsinstance of Epochs

A copy of the object.

Examples using copy:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Compute power and phase lock in label of the source space

Compute power and phase lock in label of the source space

Compute power and phase lock in label of the source space
Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)

Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)

Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)
Decoding in time-frequency space using Common Spatial Patterns (CSP)

Decoding in time-frequency space using Common Spatial Patterns (CSP)

Decoding in time-frequency space using Common Spatial Patterns (CSP)
Linear classifier on sensor data with plot patterns and filters

Linear classifier on sensor data with plot patterns and filters

Linear classifier on sensor data with plot patterns and filters
crop(tmin=None, tmax=None, include_tmax=True, verbose=None)[source]#

Crop a time interval from the epochs.

Parameters
tminfloat | None

Start time of selection in seconds.

tmaxfloat | None

End time of selection in seconds.

include_tmaxbool

If True (default), include tmax. If False, exclude tmax (similar to how Python indexing typically works).

New in version 0.19.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
epochsinstance of Epochs

The cropped epochs object, modified in-place.

Notes

Unlike Python slices, MNE time intervals by default include both their end points; crop(tmin, tmax) returns the interval tmin <= t <= tmax. Pass include_tmax=False to specify the half-open interval tmin <= t < tmax instead.

Examples using crop:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
decimate(decim, offset=0, verbose=None)[source]#

Decimate the epochs.

Parameters
decimint

Factor by which to subsample the data.

Warning

Low-pass filtering is not performed, this simply selects every Nth sample (where N is the value passed to decim), i.e., it compresses the signal (see Notes). If the data are not properly filtered, aliasing artifacts may occur.

offsetint

Apply an offset to where the decimation starts relative to the sample corresponding to t=0. The offset is in samples at the current sampling rate.

New in version 0.12.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
epochsinstance of Epochs

The decimated Epochs object.

Notes

For historical reasons, decim / “decimation” refers to simply subselecting samples from a given signal. This contrasts with the broader signal processing literature, where decimation is defined as (quoting 1, p. 172; which cites 2):

“… a general system for downsampling by a factor of M is the one shown in Figure 4.23. Such a system is called a decimator, and downsampling by lowpass filtering followed by compression [i.e, subselecting samples] has been termed decimation (Crochiere and Rabiner, 1983).”

Hence “decimation” in MNE is what is considered “compression” in the signal processing community.

Decimation can be done multiple times. For example, inst.decimate(2).decimate(2) will be the same as inst.decimate(4).

If decim is 1, this method does not copy the underlying data.

New in version 0.10.0.

References

1

Alan V. Oppenheim, Ronald W. Schafer, and John R. Buck. Discrete-Time Signal Processing. Prentice Hall, Upper Saddle River, NJ, 2 edition edition, 1999. ISBN 978-0-13-754920-7.

2

Ronald E. Crochiere and Lawrence R. Rabiner. Multirate Digital Signal Processing. Pearson, Englewood Cliffs, NJ, 1 edition edition, 1983. ISBN 978-0-13-605162-6.

Examples using decimate:

Filtering and resampling data

Filtering and resampling data

Filtering and resampling data
del_proj(idx='all')[source]#

Remove SSP projection vector.

Note

The projection vector can only be removed if it is inactive (has not been applied to the data).

Parameters
idxint | list of int | str

Index of the projector to remove. Can also be “all” (default) to remove all projectors.

Returns
selfinstance of Raw | Epochs | Evoked

The instance.

Examples using del_proj:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
drop(indices, reason='USER', verbose=None)[source]#

Drop epochs based on indices or boolean mask.

Note

The indices refer to the current set of undropped epochs rather than the complete set of dropped and undropped epochs. They are therefore not necessarily consistent with any external indices (e.g., behavioral logs). To drop epochs based on external criteria, do not use the preload=True flag when constructing an Epochs object, and call this method before calling the mne.Epochs.drop_bad() or mne.Epochs.load_data() methods.

Parameters
indicesarray of int or bool

Set epochs to remove by specifying indices to remove or a boolean mask to apply (where True values get removed). Events are correspondingly modified.

reasonstr

Reason for dropping the epochs (‘ECG’, ‘timeout’, ‘blink’ etc). Default: ‘USER’.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
epochsinstance of Epochs

The epochs with indices dropped. Operates in-place.

drop_bad(reject='existing', flat='existing', verbose=None)[source]#

Drop bad epochs without retaining the epochs data.

Should be used before slicing operations.

Warning

This operation is slow since all epochs have to be read from disk. To avoid reading epochs from disk multiple times, use mne.Epochs.load_data().

Note

To constrain the time period used for estimation of signal quality, set epochs.reject_tmin and epochs.reject_tmax, respectively.

Parameters
rejectdict | str | None

Reject epochs based on maximum peak-to-peak signal amplitude (PTP), i.e. the absolute difference between the lowest and the highest signal value. In each individual epoch, the PTP is calculated for every channel. If the PTP of any one channel exceeds the rejection threshold, the respective epoch will be dropped.

The dictionary keys correspond to the different channel types; valid keys can be any channel type present in the object.

Example:

reject = dict(grad=4000e-13,  # unit: T / m (gradiometers)
              mag=4e-12,      # unit: T (magnetometers)
              eeg=40e-6,      # unit: V (EEG channels)
              eog=250e-6      # unit: V (EOG channels)
              )

Note

Since rejection is based on a signal difference calculated for each channel separately, applying baseline correction does not affect the rejection procedure, as the difference will be preserved.

If reject is None, no rejection is performed. If 'existing' (default), then the rejection parameters set at instantiation are used.

flatdict | str | None

Reject epochs based on minimum peak-to-peak signal amplitude (PTP). Valid keys can be any channel type present in the object. The values are floats that set the minimum acceptable PTP. If the PTP is smaller than this threshold, the epoch will be dropped. If None then no rejection is performed based on flatness of the signal. If 'existing', then the flat parameters set during epoch creation are used.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
epochsinstance of Epochs

The epochs with bad epochs dropped. Operates in-place.

Notes

Dropping bad epochs can be done multiple times with different reject and flat parameters. However, once an epoch is dropped, it is dropped forever, so if more lenient thresholds may subsequently be applied, epochs.copy should be used.

Examples using drop_bad:

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks
Visualizing epoched data

Visualizing epoched data

Visualizing epoched data
EEG processing and Event Related Potentials (ERPs)

EEG processing and Event Related Potentials (ERPs)

EEG processing and Event Related Potentials (ERPs)
Decoding in time-frequency space using Common Spatial Patterns (CSP)

Decoding in time-frequency space using Common Spatial Patterns (CSP)

Decoding in time-frequency space using Common Spatial Patterns (CSP)
Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)
drop_channels(ch_names)[source]#

Drop channel(s).

Parameters
ch_namesiterable or str

Iterable (e.g. list) of channel name(s) or channel name to remove.

Returns
instinstance of Raw, Epochs, or Evoked

The modified instance.

Notes

New in version 0.9.0.

Examples using drop_channels:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Spatiotemporal permutation F-test on full sensor data

Spatiotemporal permutation F-test on full sensor data

Spatiotemporal permutation F-test on full sensor data
drop_log_stats(ignore=('IGNORED',))[source]#

Compute the channel stats based on a drop_log from Epochs.

Parameters
ignorelist

The drop reasons to ignore.

Returns
percfloat

Total percentage of epochs dropped.

See also

plot_drop_log
equalize_event_counts(event_ids=None, method='mintime')[source]#

Equalize the number of trials in each condition.

It tries to make the remaining epochs occurring as close as possible in time. This method works based on the idea that if there happened to be some time-varying (like on the scale of minutes) noise characteristics during a recording, they could be compensated for (to some extent) in the equalization process. This method thus seeks to reduce any of those effects by minimizing the differences in the times of the events within a Epochs instance. For example, if one event type occurred at time points [1, 2, 3, 4, 120, 121] and the another one at [3.5, 4.5, 120.5, 121.5], this method would remove the events at times [1, 2] for the first event type – and not the events at times [120, 121].

Parameters
event_idsNone | list | dict

The event types to equalize.

If None (default), equalize the counts of all event types present in the Epochs instance.

If a list, each element can either be a string (event name) or a list of strings. In the case where one of the entries is a list of strings, event types in that list will be grouped together before equalizing trial counts across conditions.

If a dictionary, the keys are considered as the event names whose counts to equalize, i.e., passing dict(A=1, B=2) will have the same effect as passing ['A', 'B']. This is useful if you intend to pass an event_id dictionary that was used when creating Epochs.

In the case where partial matching is used (using / in the event names), the event types will be matched according to the provided tags, that is, processing works as if the event_ids matched by the provided tags had been supplied instead. The event_ids must identify non-overlapping subsets of the epochs.

methodstr

If 'truncate', events will be truncated from the end of each type of events. If 'mintime', timing differences between each event type will be minimized.

Returns
epochsinstance of Epochs

The modified instance. It is modified in-place.

indicesarray of int

Indices from the original events list that were dropped.

Notes

For example (if epochs.event_id was {'Left': 1, 'Right': 2, 'Nonspatial':3}:

epochs.equalize_event_counts([[‘Left’, ‘Right’], ‘Nonspatial’])

would equalize the number of trials in the 'Nonspatial' condition with the total number of trials in the 'Left' and 'Right' conditions combined.

If multiple indices are provided (e.g. 'Left' and 'Right' in the example above), it is not guaranteed that after equalization the conditions will contribute equally. E.g., it is possible to end up with 70 'Nonspatial' epochs, 69 'Left' and 1 'Right'.

Changed in version 0.23: Default to equalizing all events in the passed instance if no event names were specified explicitly.

Examples using equalize_event_counts:

The Evoked data structure: evoked/averaged data

The Evoked data structure: evoked/averaged data

The Evoked data structure: evoked/averaged data
Spatiotemporal permutation F-test on full sensor data

Spatiotemporal permutation F-test on full sensor data

Spatiotemporal permutation F-test on full sensor data
Repeated measures ANOVA on source data with spatio-temporal clustering

Repeated measures ANOVA on source data with spatio-temporal clustering

Repeated measures ANOVA on source data with spatio-temporal clustering
Mass-univariate twoway repeated measures ANOVA on single trial power

Mass-univariate twoway repeated measures ANOVA on single trial power

Mass-univariate twoway repeated measures ANOVA on single trial power
Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)
export(fname, fmt='auto', *, overwrite=False, verbose=None)[source]#

Export Epochs to external formats.

Supported formats: EEGLAB (set, uses eeglabio)

Warning

Since we are exporting to external formats, there’s no guarantee that all the info will be preserved in the external format. See Notes for details.

Parameters
fnamestr

Name of the output file.

fmt‘auto’ | ‘eeglab’ | ‘edf’

Format of the export. Defaults to 'auto', which will infer the format from the filename extension. See supported formats above for more information.

overwritebool

If True (default False), overwrite the destination file if it exists.

New in version 0.24.1.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Notes

New in version 0.24.

Export to external format may not preserve all the information from the instance. To save in native MNE format (.fif) without information loss, use mne.Epochs.save() instead. Export does not apply projector(s). Unapplied projector(s) will be lost. Consider applying projector(s) before exporting with mne.Epochs.apply_proj().

For EEGLAB exports, channel locations are expanded to full EEGLAB format. For more details see eeglabio.utils.cart_to_eeglab().

property filename#

The filename.

filter(l_freq, h_freq, picks=None, filter_length='auto', l_trans_bandwidth='auto', h_trans_bandwidth='auto', n_jobs=1, method='fir', iir_params=None, phase='zero', fir_window='hamming', fir_design='firwin', skip_by_annotation=('edge', 'bad_acq_skip'), pad='edge', verbose=None)[source]#

Filter a subset of channels.

Parameters
l_freqfloat | None

For FIR filters, the lower pass-band edge; for IIR filters, the lower cutoff frequency. If None the data are only low-passed.

h_freqfloat | None

For FIR filters, the upper pass-band edge; for IIR filters, the upper cutoff frequency. If None the data are only high-passed.

picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all data channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

filter_lengthstr | int

Length of the FIR filter to use (if applicable):

  • ‘auto’ (default): The filter length is chosen based on the size of the transition regions (6.6 times the reciprocal of the shortest transition band for fir_window=’hamming’ and fir_design=”firwin2”, and half that for “firwin”).

  • str: A human-readable time in units of “s” or “ms” (e.g., “10s” or “5500ms”) will be converted to that number of samples if phase="zero", or the shortest power-of-two length at least that duration for phase="zero-double".

  • int: Specified length in samples. For fir_design=”firwin”, this should not be used.

l_trans_bandwidthfloat | str

Width of the transition band at the low cut-off frequency in Hz (high pass or cutoff 1 in bandpass). Can be “auto” (default) to use a multiple of l_freq:

min(max(l_freq * 0.25, 2), l_freq)

Only used for method='fir'.

h_trans_bandwidthfloat | str

Width of the transition band at the high cut-off frequency in Hz (low pass or cutoff 2 in bandpass). Can be “auto” (default in 0.14) to use a multiple of h_freq:

min(max(h_freq * 0.25, 2.), info['sfreq'] / 2. - h_freq)

Only used for method='fir'.

n_jobsint | str

Number of jobs to run in parallel. Can be ‘cuda’ if cupy is installed properly and method=’fir’.

methodstr

‘fir’ will use overlap-add FIR filtering, ‘iir’ will use IIR forward-backward filtering (via filtfilt).

iir_paramsdict | None

Dictionary of parameters to use for IIR filtering. If iir_params is None and method=”iir”, 4th order Butterworth will be used. For more information, see mne.filter.construct_iir_filter().

phasestr

Phase of the filter, only used if method='fir'. Symmetric linear-phase FIR filters are constructed, and if phase='zero' (default), the delay of this filter is compensated for, making it non-causal. If phase='zero-double', then this filter is applied twice, once forward, and once backward (also making it non-causal). If 'minimum', then a minimum-phase filter will be constricted and applied, which is causal but has weaker stop-band suppression.

New in version 0.13.

fir_windowstr

The window to use in FIR design, can be “hamming” (default), “hann” (default in 0.13), or “blackman”.

New in version 0.15.

fir_designstr

Can be “firwin” (default) to use scipy.signal.firwin(), or “firwin2” to use scipy.signal.firwin2(). “firwin” uses a time-domain design technique that generally gives improved attenuation using fewer samples than “firwin2”.

New in version 0.15.

skip_by_annotationstr | list of str

If a string (or list of str), any annotation segment that begins with the given string will not be included in filtering, and segments on either side of the given excluded annotated segment will be filtered separately (i.e., as independent signals). The default (('edge', 'bad_acq_skip') will separately filter any segments that were concatenated by mne.concatenate_raws() or mne.io.Raw.append(), or separated during acquisition. To disable, provide an empty list. Only used if inst is raw.

New in version 0.16..

padstr

The type of padding to use. Supports all numpy.pad() mode options. Can also be "reflect_limited", which pads with a reflected version of each vector mirrored on the first and last values of the vector, followed by zeros.

Only used for method='fir'.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Epochs, Evoked, or Raw

The filtered data.

Notes

Applies a zero-phase low-pass, high-pass, band-pass, or band-stop filter to the channels selected by picks. The data are modified inplace.

The object has to have the data loaded e.g. with preload=True or self.load_data().

l_freq and h_freq are the frequencies below which and above which, respectively, to filter out of the data. Thus the uses are:

  • l_freq < h_freq: band-pass filter

  • l_freq > h_freq: band-stop filter

  • l_freq is not None and h_freq is None: high-pass filter

  • l_freq is None and h_freq is not None: low-pass filter

self.info['lowpass'] and self.info['highpass'] are only updated with picks=None.

Note

If n_jobs > 1, more memory is required as len(picks) * n_times additional time points need to be temporaily stored in memory.

For more information, see the tutorials Background information on filtering and Filtering and resampling data and mne.filter.create_filter().

New in version 0.15.

Examples using filter:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
get_annotations_per_epoch()[source]#

Get a list of annotations that occur during each epoch.

Returns
epoch_annotslist

A list of lists (with length equal to number of epochs) where each inner list contains any annotations that overlap the corresponding epoch. Annotations are stored as a tuple of onset, duration, description (not as a Annotations object), where the onset is now relative to time=0 of the epoch, rather than time=0 of the original continuous (raw) data.

get_channel_types(picks=None, unique=False, only_data_chs=False)[source]#

Get a list of channel type for each channel.

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

uniquebool

Whether to return only unique channel types. Default is False.

only_data_chsbool

Whether to ignore non-data channels. Default is False.

Returns
channel_typeslist

The channel types.

Examples using get_channel_types:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
XDAWN Decoding From EEG data

XDAWN Decoding From EEG data

XDAWN Decoding From EEG data
get_data(picks=None, item=None, units=None, tmin=None, tmax=None)[source]#

Get all epochs as a 3D array.

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

itemslice | array-like | str | list | None

The items to get. See mne.Epochs.__getitem__() for a description of valid options. This can be substantially faster for obtaining an ndarray than __getitem__() for repeated access on large Epochs objects. None (default) is an alias for slice(None).

New in version 0.20.

unitsstr | dict | None

Specify the unit(s) that the data should be returned in. If None (default), the data is returned in the channel-type-specific default units, which are SI units (see Internal representation (units) and data channels). If a string, must be a sub-multiple of SI units that will be used to scale the data from all channels of the type associated with that unit. This only works if the data contains one channel type that has a unit (unitless channel types are left unchanged). For example if there are only EEG and STIM channels, units='uV' will scale EEG channels to micro-Volts while STIM channels will be unchanged. Finally, if a dictionary is provided, keys must be channel types, and values must be units to scale the data of that channel type to. For example dict(grad='fT/cm', mag='fT') will scale the corresponding types accordingly, but all other channel types will remain in their channel-type-specific default unit.

New in version 0.24.

tminint | float | None

Start time of data to get in seconds.

New in version 0.24.0.

tmaxint | float | None

End time of data to get in seconds.

New in version 0.24.0.

Returns
dataarray of shape (n_epochs, n_channels, n_times)

A view on epochs data.

Examples using get_data:

Background on projectors and projections

Background on projectors and projections

Background on projectors and projections
The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Divide continuous data into equally-spaced epochs

Divide continuous data into equally-spaced epochs

Divide continuous data into equally-spaced epochs
The Evoked data structure: evoked/averaged data

The Evoked data structure: evoked/averaged data

The Evoked data structure: evoked/averaged data
Show EOG artifact timing

Show EOG artifact timing

Show EOG artifact timing
Permutation F-test on sensor data with 1D cluster level

Permutation F-test on sensor data with 1D cluster level

Permutation F-test on sensor data with 1D cluster level
FDR correction on T-test on sensor data

FDR correction on T-test on sensor data

FDR correction on T-test on sensor data
Permutation T-test on sensor data

Permutation T-test on sensor data

Permutation T-test on sensor data
Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)

Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)

Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)
Decoding in time-frequency space using Common Spatial Patterns (CSP)

Decoding in time-frequency space using Common Spatial Patterns (CSP)

Decoding in time-frequency space using Common Spatial Patterns (CSP)
Continuous Target Decoding with SPoC

Continuous Target Decoding with SPoC

Continuous Target Decoding with SPoC
Analysis of evoked response using ICA and PCA reduction techniques

Analysis of evoked response using ICA and PCA reduction techniques

Analysis of evoked response using ICA and PCA reduction techniques
Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)
Linear classifier on sensor data with plot patterns and filters

Linear classifier on sensor data with plot patterns and filters

Linear classifier on sensor data with plot patterns and filters
Compute Spectro-Spatial Decomposition (SSD) spatial filters

Compute Spectro-Spatial Decomposition (SSD) spatial filters

Compute Spectro-Spatial Decomposition (SSD) spatial filters
get_montage()[source]#

Get a DigMontage from instance.

Returns
montageNone | str | DigMontage

A montage containing channel positions. If str or DigMontage is specified, the channel info will be updated with the channel positions. Default is None. For valid str values see documentation of mne.channels.make_standard_montage(). See also the documentation of mne.channels.DigMontage for more information.

Examples using get_montage:

Working with sEEG data

Working with sEEG data

Working with sEEG data
XDAWN Decoding From EEG data

XDAWN Decoding From EEG data

XDAWN Decoding From EEG data
interpolate_bads(reset_bads=True, mode='accurate', origin='auto', method=None, exclude=(), verbose=None)[source]#

Interpolate bad MEG and EEG channels.

Operates in place.

Parameters
reset_badsbool

If True, remove the bads from info.

modestr

Either 'accurate' or 'fast', determines the quality of the Legendre polynomial expansion used for interpolation of channels using the minimum-norm method.

originarray-like, shape (3,) | str

Origin of the sphere in the head coordinate frame and in meters. Can be 'auto' (default), which means a head-digitization-based origin fit.

New in version 0.17.

methoddict

Method to use for each channel type. Currently only the key “eeg” has multiple options:

  • "spline" (default)

    Use spherical spline interpolation.

  • "MNE"

    Use minimum-norm projection to a sphere and back. This is the method used for MEG channels.

The value for “meg” is “MNE”, and the value for “fnirs” is “nearest”. The default (None) is thus an alias for:

method=dict(meg="MNE", eeg="spline", fnirs="nearest")

New in version 0.21.

excludelist | tuple

The channels to exclude from interpolation. If excluded a bad channel will stay in bads.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Raw, Epochs, or Evoked

The modified instance.

Notes

New in version 0.9.0.

Examples using interpolate_bads:

Handling bad channels

Handling bad channels

Handling bad channels
iter_evoked(copy=False)[source]#

Iterate over epochs as a sequence of Evoked objects.

The Evoked objects yielded will each contain a single epoch (i.e., no averaging is performed).

This method resets the object iteration state to the first epoch.

Parameters
copybool

If False copies of data and measurement info will be omitted to save time.

load_data()[source]#

Load the data if not already preloaded.

Returns
epochsinstance of Epochs

The epochs object.

Notes

This function operates in-place.

New in version 0.10.0.

Examples using load_data:

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks
Divide continuous data into equally-spaced epochs

Divide continuous data into equally-spaced epochs

Divide continuous data into equally-spaced epochs
property metadata#

Get the metadata.

next(return_event_id=False)[source]#

Iterate over epoch data.

Parameters
return_event_idbool

If True, return both the epoch data and an event_id.

Returns
epocharray of shape (n_channels, n_times)

The epoch data.

event_idint

The event id. Only returned if return_event_id is True.

pick(picks, exclude=(), *, verbose=None)[source]#

Pick a subset of channels.

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

excludelist | str

Set of channels to exclude, only used when picking based on types (e.g., exclude=”bads” when picks=”meg”).

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

New in version 0.24.0.

Returns
instinstance of Raw, Epochs, or Evoked

The modified instance.

Examples using pick:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
pick_channels(ch_names, ordered=False)[source]#

Pick some channels.

Parameters
ch_nameslist

The list of channels to select.

orderedbool

If True (default False), ensure that the order of the channels in the modified instance matches the order of ch_names.

New in version 0.20.0.

Returns
instinstance of Raw, Epochs, or Evoked

The modified instance.

Notes

The channel names given are assumed to be a set, i.e. the order does not matter. The original order of the channels is preserved. You can use reorder_channels to set channel order if necessary.

New in version 0.9.0.

Examples using pick_channels:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Non-parametric 1 sample cluster statistic on single trial power

Non-parametric 1 sample cluster statistic on single trial power

Non-parametric 1 sample cluster statistic on single trial power
Non-parametric between conditions cluster statistic on single trial power

Non-parametric between conditions cluster statistic on single trial power

Non-parametric between conditions cluster statistic on single trial power
Mass-univariate twoway repeated measures ANOVA on single trial power

Mass-univariate twoway repeated measures ANOVA on single trial power

Mass-univariate twoway repeated measures ANOVA on single trial power
pick_types(meg=False, eeg=False, stim=False, eog=False, ecg=False, emg=False, ref_meg='auto', misc=False, resp=False, chpi=False, exci=False, ias=False, syst=False, seeg=False, dipole=False, gof=False, bio=False, ecog=False, fnirs=False, csd=False, dbs=False, include=(), exclude='bads', selection=None, verbose=None)[source]#

Pick some channels by type and names.

Parameters
megbool | str

If True include MEG channels. If string it can be ‘mag’, ‘grad’, ‘planar1’ or ‘planar2’ to select only magnetometers, all gradiometers, or a specific type of gradiometer.

eegbool

If True include EEG channels.

stimbool

If True include stimulus channels.

eogbool

If True include EOG channels.

ecgbool

If True include ECG channels.

emgbool

If True include EMG channels.

ref_megbool | str

If True include CTF / 4D reference channels. If ‘auto’, reference channels are included if compensations are present and meg is not False. Can also be the string options for the meg parameter.

miscbool

If True include miscellaneous analog channels.

respbool

If True include respiratory channels.

chpibool

If True include continuous HPI coil channels.

excibool

Flux excitation channel used to be a stimulus channel.

iasbool

Internal Active Shielding data (maybe on Triux only).

systbool

System status channel information (on Triux systems only).

seegbool

Stereotactic EEG channels.

dipolebool

Dipole time course channels.

gofbool

Dipole goodness of fit channels.

biobool

Bio channels.

ecogbool

Electrocorticography channels.

fnirsbool | str

Functional near-infrared spectroscopy channels. If True include all fNIRS channels. If False (default) include none. If string it can be ‘hbo’ (to include channels measuring oxyhemoglobin) or ‘hbr’ (to include channels measuring deoxyhemoglobin).

csdbool

EEG-CSD channels.

dbsbool

Deep brain stimulation channels.

includelist of str

List of additional channels to include. If empty do not include any.

excludelist of str | str

List of channels to exclude. If ‘bads’ (default), exclude channels in info['bads'].

selectionlist of str

Restrict sensor channels (MEG, EEG) to this list of channel names.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Raw, Epochs, or Evoked

The modified instance.

See also

pick_channels

Notes

New in version 0.9.0.

Examples using pick_types:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)
Linear classifier on sensor data with plot patterns and filters

Linear classifier on sensor data with plot patterns and filters

Linear classifier on sensor data with plot patterns and filters
plot(picks=None, scalings=None, n_epochs=20, n_channels=20, title=None, events=None, event_color=None, order=None, show=True, block=False, decim='auto', noise_cov=None, butterfly=False, show_scrollbars=True, show_scalebars=True, epoch_colors=None, event_id=None, group_by='type', precompute=None, use_opengl=None, *, theme=None)[source]#

Visualize epochs.

Bad epochs can be marked with a left click on top of the epoch. Bad channels can be selected by clicking the channel name on the left side of the main axes. Calling this function drops all the selected bad epochs as well as bad epochs marked beforehand with rejection parameters.

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick good data channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

scalings‘auto’ | dict | None

Scaling factors for the traces. If a dictionary where any value is 'auto', the scaling factor is set to match the 99.5th percentile of the respective data. If 'auto', all scalings (for all channel types) are set to 'auto'. If any values are 'auto' and the data is not preloaded, a subset up to 100 MB will be loaded. If None, defaults to:

dict(mag=1e-12, grad=4e-11, eeg=20e-6, eog=150e-6, ecg=5e-4,
     emg=1e-3, ref_meg=1e-12, misc=1e-3, stim=1,
     resp=1, chpi=1e-4, whitened=1e2)

Note

A particular scaling value s corresponds to half of the visualized signal range around zero (i.e. from 0 to +s or from 0 to -s). For example, the default scaling of 20e-6 (20µV) for EEG signals means that the visualized range will be 40 µV (20 µV in the positive direction and 20 µV in the negative direction).

n_epochsint

The number of epochs per view. Defaults to 20.

n_channelsint

The number of channels per view. Defaults to 20.

titlestr | None

The title of the window. If None, epochs name will be displayed. Defaults to None.

eventsNone | array, shape (n_events, 3)

Events to show with vertical bars. You can use plot_events as a legend for the colors. By default, the coloring scheme is the same. Defaults to None.

Warning

If the epochs have been resampled, the events no longer align with the data.

New in version 0.14.0.

event_colorcolor object | dict | None

Color(s) to use for events. To show all events in the same color, pass any matplotlib-compatible color. To color events differently, pass a dict that maps event names or integer event numbers to colors (must include entries for all events, or include a “fallback” entry with key -1). If None, colors are chosen from the current Matplotlib color cycle. Defaults to None.

orderarray of str | None

Order in which to plot channel types.

New in version 0.18.0.

showbool

Show figure if True. Defaults to True.

blockbool

Whether to halt program execution until the figure is closed. Useful for rejecting bad trials on the fly by clicking on an epoch. Defaults to False.

decimint | ‘auto’

Amount to decimate the data during display for speed purposes. You should only decimate if the data are sufficiently low-passed, otherwise aliasing can occur. The ‘auto’ mode (default) uses the decimation that results in a sampling rate at least three times larger than info['lowpass'] (e.g., a 40 Hz lowpass will result in at least a 120 Hz displayed sample rate).

New in version 0.15.0.

noise_covinstance of Covariance | str | None

Noise covariance used to whiten the data while plotting. Whitened data channels are scaled by scalings['whitened'], and their channel names are shown in italic. Can be a string to load a covariance from disk. See also mne.Evoked.plot_white() for additional inspection of noise covariance properties when whitening evoked data. For data processed with SSS, the effective dependence between magnetometers and gradiometers may introduce differences in scaling, consider using mne.Evoked.plot_white().

New in version 0.16.0.

butterflybool

Whether to directly call the butterfly view.

New in version 0.18.0.

show_scrollbarsbool

Whether to show scrollbars when the plot is initialized. Can be toggled after initialization by pressing z (“zen mode”) while the plot window is focused. Default is True.

New in version 0.19.0.

show_scalebarsbool

Whether to show scale bars when the plot is initialized. Can be toggled after initialization by pressing s while the plot window is focused. Default is True.

New in version 0.24.0.

epoch_colorslist of (n_epochs) list (of n_channels) | None

Colors to use for individual epochs. If None, use default colors.

event_iddict | None

Dictionary of event labels (e.g. ‘aud_l’) as keys and associated event integers as values. Useful when events contains event numbers not present in epochs.event_id (e.g., because of event subselection). Values in event_id will take precedence over those in epochs.event_id when there are overlapping keys.

New in version 0.20.

group_bystr

How to group channels. 'type' groups by channel type, 'original' plots in the order of ch_names, 'selection' uses Elekta’s channel groupings (only works for Neuromag data), 'position' groups the channels by the positions of the sensors. 'selection' and 'position' modes allow custom selections by using a lasso selector on the topomap. In butterfly mode, 'type' and 'original' group the channels by type, whereas 'selection' and 'position' use regional grouping. 'type' and 'original' modes are ignored when order is not None. Defaults to 'type'.

precomputebool | str

Whether to load all data (not just the visible portion) into RAM and apply preprocessing (e.g., projectors) to the full data array in a separate processor thread, instead of window-by-window during scrolling. The default None uses the MNE_BROWSER_PRECOMPUTE variable, which defaults to 'auto'. 'auto' compares available RAM space to the expected size of the precomputed data, and precomputes only if enough RAM is available. This is only used with the Qt backend.

New in version 0.24.

Changed in version 1.0: Support for the MNE_BROWSER_PRECOMPUTE config variable.

use_openglbool | None

Whether to use OpenGL when rendering the plot (requires pyopengl). May increase performance, but effect is dependent on system CPU and graphics hardware. Only works if using the Qt backend. Default is None, which will use False unless the user configuration variable MNE_BROWSER_USE_OPENGL is set to 'true', see mne.set_config().

New in version 0.24.

themestr | path-like

Can be “auto”, “light”, or “dark” or a path-like to a custom stylesheet. For Dark-Mode and automatic Dark-Mode-Detection, qdarkstyle and darkdetect, respectively, are required. If None (default), the config option MNE_BROWSER_THEME will be used, defaulting to “auto” if it’s not found. Only supported by the 'qt' backend.

New in version 1.0.

Returns
figmatplotlib.figure.Figure | mne_qt_browser.figure.MNEQtBrowser

Browser instance.

Notes

The arrow keys (up/down/left/right) can be used to navigate between channels and epochs and the scaling can be adjusted with - and + (or =) keys, but this depends on the backend matplotlib is configured to use (e.g., mpl.use(TkAgg) should work). Full screen mode can be toggled with f11 key. The amount of epochs and channels per view can be adjusted with home/end and page down/page up keys. h key plots a histogram of peak-to-peak values along with the used rejection thresholds. Butterfly plot can be toggled with b key. Left mouse click adds a vertical line to the plot. Click ‘help’ button at bottom left corner of the plotter to view all the options.

New in version 0.10.0.

Examples using plot:

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks
The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
EEG processing and Event Related Potentials (ERPs)

EEG processing and Event Related Potentials (ERPs)

EEG processing and Event Related Potentials (ERPs)
Plotting whitened data

Plotting whitened data

Plotting whitened data
Working with sEEG data

Working with sEEG data

Working with sEEG data
DICS for power mapping

DICS for power mapping

DICS for power mapping
plot_drop_log(threshold=0, n_max_plot=20, subject=None, color=(0.9, 0.9, 0.9), width=0.8, ignore=('IGNORED',), show=True)[source]#

Show the channel stats based on a drop_log from Epochs.

Parameters
thresholdfloat

The percentage threshold to use to decide whether or not to plot. Default is zero (always plot).

n_max_plotint

Maximum number of channels to show stats for.

subjectstr | None

The subject name to use in the title of the plot. If None, do not display a subject name.

Changed in version 0.23: Added support for None.

Changed in version 1.0: Defaults to None.

colortuple | str

Color to use for the bars.

widthfloat

Width of the bars.

ignorelist

The drop reasons to ignore.

showbool

Show figure if True.

Returns
figinstance of matplotlib.figure.Figure

The figure.

Examples using plot_drop_log:

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks
Preprocessing functional near-infrared spectroscopy (fNIRS) data

Preprocessing functional near-infrared spectroscopy (fNIRS) data

Preprocessing functional near-infrared spectroscopy (fNIRS) data
EEG processing and Event Related Potentials (ERPs)

EEG processing and Event Related Potentials (ERPs)

EEG processing and Event Related Potentials (ERPs)
plot_image(picks=None, sigma=0.0, vmin=None, vmax=None, colorbar=True, order=None, show=True, units=None, scalings=None, cmap=None, fig=None, axes=None, overlay_times=None, combine=None, group_by=None, evoked=True, ts_args=None, title=None, clear=False)[source]#

Plot Event Related Potential / Fields image.

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick good data channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided. picks interacts with group_by and combine to determine the number of figures generated; see Notes.

sigmafloat

The standard deviation of a Gaussian smoothing window applied along the epochs axis of the image. If 0, no smoothing is applied. Defaults to 0.

vminNone | float | callable()

The min value in the image (and the ER[P/F]). The unit is µV for EEG channels, fT for magnetometers and fT/cm for gradiometers. If vmin is None and multiple plots are returned, the limit is equalized within channel types. Hint: to specify the lower limit of the data, use vmin=lambda data: data.min().

vmaxNone | float | callable()

The max value in the image (and the ER[P/F]). The unit is µV for EEG channels, fT for magnetometers and fT/cm for gradiometers. If vmin is None and multiple plots are returned, the limit is equalized within channel types.

colorbarbool

Display or not a colorbar.

orderNone | array of int | callable()

If not None, order is used to reorder the epochs along the y-axis of the image. If it is an array of int, its length should match the number of good epochs. If it is a callable it should accept two positional parameters (times and data, where data.shape == (len(good_epochs), len(times))) and return an array of indices that will sort data along its first axis.

showbool

Show figure if True.

unitsdict | None

The units of the channel types used for axes labels. If None, defaults to units=dict(eeg='µV', grad='fT/cm', mag='fT').

scalingsdict | None

The scalings of the channel types to be applied for plotting. If None, defaults to scalings=dict(eeg=1e6, grad=1e13, mag=1e15, eog=1e6).

cmapNone | colormap | (colormap, bool) | ‘interactive’

Colormap. If tuple, the first value indicates the colormap to use and the second value is a boolean defining interactivity. In interactive mode the colors are adjustable by clicking and dragging the colorbar with left and right mouse button. Left mouse button moves the scale up and down and right mouse button adjusts the range. Hitting space bar resets the scale. Up and down arrows can be used to change the colormap. If ‘interactive’, translates to (‘RdBu_r’, True). If None, “RdBu_r” is used, unless the data is all positive, in which case “Reds” is used.

figFigure | None

Figure instance to draw the image to. Figure must contain the correct number of axes for drawing the epochs image, the evoked response, and a colorbar (depending on values of evoked and colorbar). If None a new figure is created. Defaults to None.

axeslist of Axes | dict of list of Axes | None

List of Axes objects in which to draw the image, evoked response, and colorbar (in that order). Length of list must be 1, 2, or 3 (depending on values of colorbar and evoked parameters). If a dict, each entry must be a list of Axes objects with the same constraints as above. If both axes and group_by are dicts, their keys must match. Providing non-None values for both fig and axes results in an error. Defaults to None.

overlay_timesarray_like, shape (n_epochs,) | None

Times (in seconds) at which to draw a line on the corresponding row of the image (e.g., a reaction time associated with each epoch). Note that overlay_times should be ordered to correspond with the Epochs object (i.e., overlay_times[0] corresponds to epochs[0], etc).

combineNone | str | callable()

How to combine information across channels. If a str, must be one of ‘mean’, ‘median’, ‘std’ (standard deviation) or ‘gfp’ (global field power). If callable, the callable must accept one positional input (data of shape (n_epochs, n_channels, n_times)) and return an array of shape (n_epochs, n_times). For example:

combine = lambda data: np.median(data, axis=1)

If combine is None, channels are combined by computing GFP, unless group_by is also None and picks is a list of specific channels (not channel types), in which case no combining is performed and each channel gets its own figure. See Notes for further details. Defaults to None.

group_byNone | dict

Specifies which channels are aggregated into a single figure, with aggregation method determined by the combine parameter. If not None, one Figure is made per dict entry; the dict key will be used as the figure title and the dict values must be lists of picks (either channel names or integer indices of epochs.ch_names). For example:

group_by=dict(Left_ROI=[1, 2, 3, 4], Right_ROI=[5, 6, 7, 8])

Note that within a dict entry all channels must have the same type. group_by interacts with picks and combine to determine the number of figures generated; see Notes. Defaults to None.

evokedbool

Draw the ER[P/F] below the image or not.

ts_argsNone | dict

Arguments passed to a call to plot_compare_evokeds to style the evoked plot below the image. Defaults to an empty dictionary, meaning plot_compare_evokeds will be called with default parameters.

titleNone | str

If str, will be plotted as figure title. Otherwise, the title will indicate channel(s) or channel type being plotted. Defaults to None.

clearbool

Whether to clear the axes before plotting (if fig or axes are provided). Defaults to False.

Returns
figslist of Figure

One figure per channel, channel type, or group, depending on values of picks, group_by, and combine. See Notes.

Notes

You can control how channels are aggregated into one figure or plotted in separate figures through a combination of the picks, group_by, and combine parameters. If group_by is a dict, the result is one Figure per dictionary key (for any valid values of picks and combine). If group_by is None, the number and content of the figures generated depends on the values of picks and combine, as summarized in this table:

group_by

picks

combine

result

dict

None, int, list of int, ch_name, list of ch_names, ch_type, list of ch_types

None, string, or callable

1 figure per dict key

None

None, ch_type, list of ch_types

None, string, or callable

1 figure per ch_type

int, ch_name, list of int, list of ch_names

None

1 figure per pick

string or callable

1 figure

Examples using plot_image:

Overview of MEG/EEG analysis with MNE-Python

Overview of MEG/EEG analysis with MNE-Python

Overview of MEG/EEG analysis with MNE-Python
Overview of artifact detection

Overview of artifact detection

Overview of artifact detection
Rejecting bad data spans and breaks

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks
Divide continuous data into equally-spaced epochs

Divide continuous data into equally-spaced epochs

Divide continuous data into equally-spaced epochs
Plot single trial activity, grouped by ROI and sorted by RT

Plot single trial activity, grouped by ROI and sorted by RT

Plot single trial activity, grouped by ROI and sorted by RT
plot_projs_topomap(ch_type=None, cmap=None, sensors=True, colorbar=False, res=64, size=1, show=True, outlines='head', contours=6, image_interp='bilinear', axes=None, vlim=(None, None), sphere=None, extrapolate='auto', border='mean')[source]#

Plot SSP vector.

Parameters
ch_type‘mag’ | ‘grad’ | ‘planar1’ | ‘planar2’ | ‘eeg’ | None | list

The channel type to plot. For ‘grad’, the gradiometers are collec- ted in pairs and the RMS for each pair is plotted. If None (default), it will return all channel types present. If a list of ch_types is provided, it will return multiple figures.

cmapmatplotlib colormap | (colormap, bool) | ‘interactive’ | None

Colormap to use. If tuple, the first value indicates the colormap to use and the second value is a boolean defining interactivity. In interactive mode (only works if colorbar=True) the colors are adjustable by clicking and dragging the colorbar with left and right mouse button. Left mouse button moves the scale up and down and right mouse button adjusts the range. Hitting space bar resets the range. Up and down arrows can be used to change the colormap. If None (default), ‘Reds’ is used for all positive data, otherwise defaults to ‘RdBu_r’. If ‘interactive’, translates to (None, True).

sensorsbool | str

Add markers for sensor locations to the plot. Accepts matplotlib plot format string (e.g., ‘r+’ for red plusses). If True, a circle will be used (via .add_artist). Defaults to True.

colorbarbool

Plot a colorbar.

resint

The resolution of the topomap image (n pixels along each side).

sizescalar

Side length of the topomaps in inches (only applies when plotting multiple topomaps at a time).

showbool

Show figure if True.

outlines‘head’ | ‘skirt’ | dict | None

The outlines to be drawn. If ‘head’, the default head scheme will be drawn. If ‘skirt’ the head scheme will be drawn, but sensors are allowed to be plotted outside of the head circle. If dict, each key refers to a tuple of x and y positions, the values in ‘mask_pos’ will serve as image mask. Alternatively, a matplotlib patch object can be passed for advanced masking options, either directly or as a function that returns patches (required for multi-axis plots). If None, nothing will be drawn. Defaults to ‘head’.

contoursint | array of float

The number of contour lines to draw. If 0, no contours will be drawn. When an integer, matplotlib ticker locator is used to find suitable values for the contour thresholds (may sometimes be inaccurate, use array for accuracy). If an array, the values represent the levels for the contours. Defaults to 6.

image_interpstr

The image interpolation to be used. All matplotlib options are accepted.

axesinstance of Axes | list | None

The axes to plot to. If list, the list must be a list of Axes of the same length as the number of projectors. If instance of Axes, there must be only one projector. Defaults to None.

vlimtuple of length 2 | ‘joint’

Colormap limits to use. If tuple, specifies the lower and upper bounds of the colormap (in that order); providing None for either of these will set the corresponding boundary at the min/max of the data (separately for each projector). The keyword value 'joint' will compute the colormap limits jointly across all provided projectors of the same channel type, using the min/max of the projector data. If vlim is 'joint', info must not be None. Defaults to (None, None).

spherefloat | array-like | str | None

The sphere parameters to use for the cartoon head. Can be array-like of shape (4,) to give the X/Y/Z origin and radius in meters, or a single float to give the radius (origin assumed 0, 0, 0). Can also be a spherical ConductorModel, which will use the origin and radius. Can be “auto” to use a digitization-based fit. Can also be None (default) to use ‘auto’ when enough extra digitization points are available, and 0.095 otherwise. Currently the head radius does not affect plotting.

New in version 0.20.

extrapolatestr

Options:

  • 'box'

    Extrapolate to four points placed to form a square encompassing all data points, where each side of the square is three times the range of the data in the respective dimension.

  • 'local' (default for MEG sensors)

    Extrapolate only to nearby points (approximately to points closer than median inter-electrode distance). This will also set the mask to be polygonal based on the convex hull of the sensors.

  • 'head' (default for non-MEG sensors)

    Extrapolate out to the edges of the clipping circle. This will be on the head circle when the sensors are contained within the head circle, but it can extend beyond the head when sensors are plotted outside the head circle.

Changed in version 0.21:

  • The default was changed to 'local' for MEG sensors.

  • 'local' was changed to use a convex hull mask

  • 'head' was changed to extrapolate out to the clipping circle.

New in version 0.20.

borderfloat | ‘mean’

Value to extrapolate to on the topomap borders. If 'mean' (default), then each extrapolated point has the average value of its neighbours.

New in version 0.20.

Returns
figinstance of Figure

Figure distributing one image per channel across sensor topography.

Examples using plot_projs_topomap:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Visualizing epoched data

Visualizing epoched data

Visualizing epoched data
plot_psd(fmin=0, fmax=inf, tmin=None, tmax=None, proj=False, bandwidth=None, adaptive=False, low_bias=True, normalization='length', picks=None, ax=None, color='black', xscale='linear', area_mode='std', area_alpha=0.33, dB=True, estimate='auto', show=True, n_jobs=1, average=False, line_alpha=None, spatial_colors=True, sphere=None, exclude='bads', verbose=None)[source]#

Plot the power spectral density across channels.

Different channel types are drawn in sub-plots. When the data have been processed with a bandpass, lowpass or highpass filter, dashed lines (╎) indicate the boundaries of the filter. The line noise frequency is also indicated with a dashed line (⋮).

Parameters
fminfloat

Start frequency to consider.

fmaxfloat

End frequency to consider.

tminfloat | None

Start time to consider.

tmaxfloat | None

End time to consider.

projbool

Apply projection.

bandwidthfloat

The bandwidth of the multi taper windowing function in Hz. The default value is a window half-bandwidth of 4.

adaptivebool

Use adaptive weights to combine the tapered spectra into PSD (slow, use n_jobs >> 1 to speed up computation).

low_biasbool

Only use tapers with more than 90% spectral concentration within bandwidth.

normalization‘full’ | ‘length’

Normalization strategy. If “full”, the PSD will be normalized by the sampling rate as well as the length of the signal (as in Nitime). Default is 'length'.

picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick good data channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provide Cannot be None if ax is supplied.If both picks and ax are None separate subplots will be created for each standard channel type (mag, grad, and eeg).

axinstance of Axes | None

Axes to plot into. If None, axes will be created.

colorstr | tuple

A matplotlib-compatible color to use. Has no effect when spatial_colors=True.

xscalestr

Can be ‘linear’ (default) or ‘log’.

area_modestr | None

Mode for plotting area. If ‘std’, the mean +/- 1 STD (across channels) will be plotted. If ‘range’, the min and max (across channels) will be plotted. Bad channels will be excluded from these calculations. If None, no area will be plotted. If average=False, no area is plotted.

area_alphafloat

Alpha for the area.

dBbool

Plot Power Spectral Density (PSD), in units (amplitude**2/Hz (dB)) if dB=True, and estimate='power' or estimate='auto'. Plot PSD in units (amplitude**2/Hz) if dB=False and, estimate='power'. Plot Amplitude Spectral Density (ASD), in units (amplitude/sqrt(Hz)), if dB=False and estimate='amplitude' or estimate='auto'. Plot ASD, in units (amplitude/sqrt(Hz) (db)), if dB=True and estimate='amplitude'.

estimatestr, {‘auto’, ‘power’, ‘amplitude’}

Can be “power” for power spectral density (PSD), “amplitude” for amplitude spectrum density (ASD), or “auto” (default), which uses “power” when dB is True and “amplitude” otherwise.

showbool

Show the figure if True.

n_jobsint

The number of jobs to run in parallel (default 1). If -1, it is set to the number of CPU cores. Requires the joblib package.

averagebool

If False, the PSDs of all channels is displayed. No averaging is done and parameters area_mode and area_alpha are ignored. When False, it is possible to paint an area (hold left mouse button and drag) to plot a topomap.

line_alphafloat | None

Alpha for the PSD line. Can be None (default) to use 1.0 when average=True and 0.1 when average=False.

spatial_colorsbool

Whether to use spatial colors. Only used when average=False.

spherefloat | array-like | str | None

The sphere parameters to use for the cartoon head. Can be array-like of shape (4,) to give the X/Y/Z origin and radius in meters, or a single float to give the radius (origin assumed 0, 0, 0). Can also be a spherical ConductorModel, which will use the origin and radius. Can be “auto” to use a digitization-based fit. Can also be None (default) to use ‘auto’ when enough extra digitization points are available, and 0.095 otherwise. Currently the head radius does not affect plotting.

New in version 0.20.

excludelist of str | ‘bads’

Channels names to exclude from being shown. If ‘bads’, the bad channels are excluded. Pass an empty list to plot all channels (including channels marked “bad”, if any).

New in version 0.24.0.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
figinstance of Figure

Figure with frequency spectra of the data channels.

Examples using plot_psd:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Frequency and time-frequency sensor analysis

Frequency and time-frequency sensor analysis

Frequency and time-frequency sensor analysis
plot_psd_topomap(bands=None, tmin=None, tmax=None, proj=False, bandwidth=None, adaptive=False, low_bias=True, normalization='length', ch_type=None, cmap=None, agg_fun=None, dB=True, n_jobs=1, normalize=False, cbar_fmt='auto', outlines='head', axes=None, show=True, sphere=None, vlim=(None, None), verbose=None)[source]#

Plot the topomap of the power spectral density across epochs.

Parameters
bandslist of tuple | None

The frequencies or frequency ranges to plot. Length-2 tuples specify a single frequency and a subplot title (e.g., (6.5, 'presentation rate')); length-3 tuples specify lower and upper band edges and a subplot title. If None (the default), expands to:

bands = [(0, 4, 'Delta'), (4, 8, 'Theta'), (8, 12, 'Alpha'),
         (12, 30, 'Beta'), (30, 45, 'Gamma')]

In bands where a single frequency is provided, the topomap will reflect the single frequency bin that is closest to the provided value.

tminfloat | None

Start time to consider.

tmaxfloat | None

End time to consider.

projbool

Apply projection.

bandwidthfloat

The bandwidth of the multi taper windowing function in Hz. The default value is a window half-bandwidth of 4 Hz.

adaptivebool

Use adaptive weights to combine the tapered spectra into PSD (slow, use n_jobs >> 1 to speed up computation).

low_biasbool

Only use tapers with more than 90% spectral concentration within bandwidth.

normalization‘full’ | ‘length’

Normalization strategy. If “full”, the PSD will be normalized by the sampling rate as well as the length of the signal (as in Nitime). Default is 'length'.

ch_type‘mag’ | ‘grad’ | ‘planar1’ | ‘planar2’ | ‘eeg’ | None

The channel type to plot. For ‘grad’, the gradiometers are collected in pairs and the mean for each pair is plotted. If None, then first available channel type from order given above is used. Defaults to None.

cmapmatplotlib colormap | (colormap, bool) | ‘interactive’ | None

Colormap to use. If tuple, the first value indicates the colormap to use and the second value is a boolean defining interactivity. In interactive mode the colors are adjustable by clicking and dragging the colorbar with left and right mouse button. Left mouse button moves the scale up and down and right mouse button adjusts the range. Hitting space bar resets the range. Up and down arrows can be used to change the colormap. If None, 'Reds' is used for data that is either all-positive or all-negative, and 'RdBu_r' is used otherwise. 'interactive' is equivalent to (None, True). Defaults to None.

agg_funcallable()

The function used to aggregate over frequencies. Defaults to numpy.sum() if normalize=True, else numpy.mean().

dBbool

If True, transform data to decibels (with 10 * np.log10(data)) following the application of agg_fun. Ignored if normalize=True.

n_jobsint

The number of jobs to run in parallel (default 1). If -1, it is set to the number of CPU cores. Requires the joblib package.

normalizebool

If True, each band will be divided by the total power. Defaults to False.

cbar_fmtstr

Format string for the colorbar tick labels. If 'auto', is equivalent to ‘%0.3f’ if dB=False and ‘%0.1f’ if dB=True. Defaults to 'auto'.

outlines‘head’ | ‘skirt’ | dict | None

The outlines to be drawn. If ‘head’, the default head scheme will be drawn. If ‘skirt’ the head scheme will be drawn, but sensors are allowed to be plotted outside of the head circle. If dict, each key refers to a tuple of x and y positions, the values in ‘mask_pos’ will serve as image mask. Alternatively, a matplotlib patch object can be passed for advanced masking options, either directly or as a function that returns patches (required for multi-axis plots). If None, nothing will be drawn. Defaults to ‘head’.

axeslist of Axes | None

List of axes to plot consecutive topographies to. If None the axes will be created automatically. Defaults to None.

showbool

Show figure if True.

spherefloat | array-like | str | None

The sphere parameters to use for the cartoon head. Can be array-like of shape (4,) to give the X/Y/Z origin and radius in meters, or a single float to give the radius (origin assumed 0, 0, 0). Can also be a spherical ConductorModel, which will use the origin and radius. Can be “auto” to use a digitization-based fit. Can also be None (default) to use ‘auto’ when enough extra digitization points are available, and 0.095 otherwise. Currently the head radius does not affect plotting.

New in version 0.20.

vlimtuple of length 2 | ‘joint’

Colormap limits to use. If a tuple of floats, specifies the lower and upper bounds of the colormap (in that order); providing None for either entry will set the corresponding boundary at the min/max of the data (separately for each topomap). Elements of the tuple may also be callable functions which take in a NumPy array and return a scalar. If vlim='joint', will compute the colormap limits jointly across all topomaps of the same channel type, using the min/max of the data. Defaults to (None, None).

New in version 0.21.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
figinstance of Figure

Figure distributing one image per channel across sensor topography.

Examples using plot_psd_topomap:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Frequency and time-frequency sensor analysis

Frequency and time-frequency sensor analysis

Frequency and time-frequency sensor analysis
plot_sensors(kind='topomap', ch_type=None, title=None, show_names=False, ch_groups=None, to_sphere=True, axes=None, block=False, show=True, sphere=None, verbose=None)[source]#

Plot sensor positions.

Parameters
kindstr

Whether to plot the sensors as 3d, topomap or as an interactive sensor selection dialog. Available options ‘topomap’, ‘3d’, ‘select’. If ‘select’, a set of channels can be selected interactively by using lasso selector or clicking while holding control key. The selected channels are returned along with the figure instance. Defaults to ‘topomap’.

ch_typeNone | str

The channel type to plot. Available options ‘mag’, ‘grad’, ‘eeg’, ‘seeg’, ‘dbs’, ‘ecog’, ‘all’. If 'all', all the available mag, grad, eeg, seeg, dbs, and ecog channels are plotted. If None (default), then channels are chosen in the order given above.

titlestr | None

Title for the figure. If None (default), equals to 'Sensor positions (%s)' % ch_type.

show_namesbool | array of str

Whether to display all channel names. If an array, only the channel names in the array are shown. Defaults to False.

ch_groups‘position’ | array of shape (n_ch_groups, n_picks) | None

Channel groups for coloring the sensors. If None (default), default coloring scheme is used. If ‘position’, the sensors are divided into 8 regions. See order kwarg of mne.viz.plot_raw(). If array, the channels are divided by picks given in the array.

New in version 0.13.0.

to_spherebool

Whether to project the 3d locations to a sphere. When False, the sensor array appears similar as to looking downwards straight above the subject’s head. Has no effect when kind=’3d’. Defaults to True.

New in version 0.14.0.

axesinstance of Axes | instance of Axes3D | None

Axes to draw the sensors to. If kind='3d', axes must be an instance of Axes3D. If None (default), a new axes will be created.

New in version 0.13.0.

blockbool

Whether to halt program execution until the figure is closed. Defaults to False.

New in version 0.13.0.

showbool

Show figure if True. Defaults to True.

spherefloat | array-like | str | None

The sphere parameters to use for the cartoon head. Can be array-like of shape (4,) to give the X/Y/Z origin and radius in meters, or a single float to give the radius (origin assumed 0, 0, 0). Can also be a spherical ConductorModel, which will use the origin and radius. Can be “auto” to use a digitization-based fit. Can also be None (default) to use ‘auto’ when enough extra digitization points are available, and 0.095 otherwise. Currently the head radius does not affect plotting.

New in version 0.20.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
figinstance of Figure

Figure containing the sensor topography.

selectionlist

A list of selected channels. Only returned if kind=='select'.

Notes

This function plots the sensor locations from the info structure using matplotlib. For drawing the sensors using PyVista see mne.viz.plot_alignment().

New in version 0.12.0.

Examples using plot_sensors:

Visualizing epoched data

Visualizing epoched data

Visualizing epoched data
plot_topo_image(layout=None, sigma=0.0, vmin=None, vmax=None, colorbar=None, order=None, cmap='RdBu_r', layout_scale=0.95, title=None, scalings=None, border='none', fig_facecolor='k', fig_background=None, font_color='w', show=True)[source]#

Plot Event Related Potential / Fields image on topographies.

Parameters
layoutinstance of Layout

System specific sensor positions.

sigmafloat

The standard deviation of the Gaussian smoothing to apply along the epoch axis to apply in the image. If 0., no smoothing is applied.

vminfloat

The min value in the image. The unit is µV for EEG channels, fT for magnetometers and fT/cm for gradiometers.

vmaxfloat

The max value in the image. The unit is µV for EEG channels, fT for magnetometers and fT/cm for gradiometers.

colorbarbool | None

Whether to display a colorbar or not. If None a colorbar will be shown only if all channels are of the same type. Defaults to None.

orderNone | array of int | callable()

If not None, order is used to reorder the epochs on the y-axis of the image. If it’s an array of int it should be of length the number of good epochs. If it’s a callable the arguments passed are the times vector and the data as 2d array (data.shape[1] == len(times)).

cmapcolormap

Colors to be mapped to the values.

layout_scalefloat

Scaling factor for adjusting the relative size of the layout on the canvas.

titlestr

Title of the figure.

scalingsdict | None

The scalings of the channel types to be applied for plotting. If None, defaults to dict(eeg=1e6, grad=1e13, mag=1e15).

borderstr

Matplotlib borders style to be used for each sensor plot.

fig_facecolorcolor

The figure face color. Defaults to black.

fig_backgroundNone | array

A background image for the figure. This must be a valid input to matplotlib.pyplot.imshow(). Defaults to None.

font_colorcolor

The color of tick labels in the colorbar. Defaults to white.

showbool

Whether to show the figure. Defaults to True.

Returns
figinstance of matplotlib.figure.Figure

Figure distributing one image per channel across sensor topography.

Notes

In an interactive Python session, this plot will be interactive; clicking on a channel image will pop open a larger view of the image; this image will always have a colorbar even when the topo plot does not (because it shows multiple sensor types).

property proj#

Whether or not projections are active.

rename_channels(mapping, allow_duplicates=False, verbose=None)[source]#

Rename channels.

Parameters
mappingdict | callable()

A dictionary mapping the old channel to a new channel name e.g. {‘EEG061’ : ‘EEG161’}. Can also be a callable function that takes and returns a string.

Changed in version 0.10.0: Support for a callable function.

allow_duplicatesbool

If True (default False), allow duplicates, which will automatically be renamed with -N at the end.

New in version 0.22.0.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Raw | Epochs | Evoked

The instance (modified in place).

Changed in version 0.20: Return the instance.

Notes

New in version 0.9.0.

Examples using rename_channels:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
reorder_channels(ch_names)[source]#

Reorder channels.

Parameters
ch_nameslist

The desired channel order.

Returns
instinstance of Raw, Epochs, or Evoked

The modified instance.

Notes

Channel names must be unique. Channels that are not in ch_names are dropped.

New in version 0.16.0.

Examples using reorder_channels:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
resample(sfreq, npad='auto', window='boxcar', n_jobs=1, pad='edge', verbose=None)[source]#

Resample data.

If appropriate, an anti-aliasing filter is applied before resampling. See Resampling and decimating data for more information.

Note

Data must be loaded.

Parameters
sfreqfloat

New sample rate to use.

npadint | str

Amount to pad the start and end of the data. Can also be “auto” to use a padding that will result in a power-of-two size (can be much faster).

windowstr | tuple

Frequency-domain window to use in resampling. See scipy.signal.resample().

n_jobsint | str

Number of jobs to run in parallel. Can be ‘cuda’ if cupy is installed properly.

padstr

The type of padding to use. Supports all numpy.pad() mode options. Can also be "reflect_limited", which pads with a reflected version of each vector mirrored on the first and last values of the vector, followed by zeros. The default is 'edge', which pads with the edge values of each vector.

New in version 0.15.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Epochs or Evoked

The resampled object.

Notes

For some data, it may be more accurate to use npad=0 to reduce artifacts. This is dataset dependent – check your data!

Examples using resample:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
reset_drop_log_selection()[source]#

Reset the drop_log and selection entries.

This method will simplify self.drop_log and self.selection so that they are meaningless (tuple of empty tuples and increasing integers, respectively). This can be useful when concatenating many Epochs instances, as drop_log can accumulate many entries which can become problematic when saving.

save(fname, split_size='2GB', fmt='single', overwrite=False, split_naming='neuromag', verbose=True)[source]#

Save epochs in a fif file.

Parameters
fnamestr

The name of the file, which should end with -epo.fif or -epo.fif.gz.

split_sizestr | int

Large raw files are automatically split into multiple pieces. This parameter specifies the maximum size of each piece. If the parameter is an integer, it specifies the size in Bytes. It is also possible to pass a human-readable string, e.g., 100MB. Note: Due to FIFF file limitations, the maximum split size is 2GB.

New in version 0.10.0.

fmtstr

Format to save data. Valid options are ‘double’ or ‘single’ for 64- or 32-bit float, or for 128- or 64-bit complex numbers respectively. Note: Data are processed with double precision. Choosing single-precision, the saved data will slightly differ due to the reduction in precision.

New in version 0.17.

overwritebool

If True (default False), overwrite the destination file if it exists. To overwrite original file (the same one that was loaded), data must be preloaded upon reading. This defaults to True in 0.18 but will change to False in 0.19.

New in version 0.18.

split_naming‘neuromag’ | ‘bids’

When splitting files, append a filename partition with the appropriate naming schema: for 'neuromag', a split file fname.fif will be named fname.fif, fname-1.fif, fname-2.fif etc.; while for 'bids', it will be named fname_split-01.fif, fname_split-02.fif, etc.

New in version 0.24.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Notes

Bad epochs will be dropped before saving the epochs to disk.

Examples using save:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
savgol_filter(h_freq, verbose=None)[source]#

Filter the data using Savitzky-Golay polynomial method.

Parameters
h_freqfloat

Approximate high cut-off frequency in Hz. Note that this is not an exact cutoff, since Savitzky-Golay filtering 3 is done using polynomial fits instead of FIR/IIR filtering. This parameter is thus used to determine the length of the window over which a 5th-order polynomial smoothing is used.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Epochs or Evoked

The object with the filtering applied.

Notes

For Savitzky-Golay low-pass approximation, see:

New in version 0.9.0.

References

3

Abraham Savitzky and Marcel J. E. Golay. Smoothing and differentiation of data by simplified least squares procedures. Analytical Chemistry, 36(8):1627–1639, 1964. doi:10.1021/ac60214a047.

Examples

>>> import mne
>>> from os import path as op
>>> evoked_fname = op.join(mne.datasets.sample.data_path(), 'MEG', 'sample', 'sample_audvis-ave.fif')  
>>> evoked = mne.read_evokeds(evoked_fname, baseline=(None, 0))[0]  
>>> evoked.savgol_filter(10.)  # low-pass at around 10 Hz 
>>> evoked.plot()  
set_annotations(annotations, on_missing='raise', *, verbose=None)[source]#

Setter for Epoch annotations from Raw.

This method does not handle offsetting the times based on first_samp or measurement dates, since that is expected to occur in Raw.set_annotations().

Parameters
annotationsinstance of mne.Annotations | None

Annotations to set.

on_missing‘raise’ | ‘warn’ | ‘ignore’

Can be 'raise' (default) to raise an error, 'warn' to emit a warning, or 'ignore' to ignore when entries in ch_names are not present in the raw instance.

New in version 0.23.0.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
selfinstance of Epochs

The epochs object with annotations.

Notes

Annotation onsets and offsets are stored as time in seconds (not as sample numbers).

If you have an -epo.fif file saved to disk created before 1.0, annotations can be added correctly only if no decimation or resampling was performed. We thus suggest to regenerate your mne.Epochs from raw and re-save to disk with 1.0+ if you want to safely work with Annotations in epochs.

Since this method does not handle offsetting the times based on first_samp or measurement dates, the recommended way to add Annotations is:

raw.set_annotations(annotations)
annotations = raw.annotations
epochs.set_annotations(annotations)

New in version 1.0.

set_channel_types(mapping, verbose=None)[source]#

Define the sensor type of channels.

Parameters
mappingdict

A dictionary mapping a channel to a sensor type (str), e.g., {'EEG061': 'eog'}.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Raw | Epochs | Evoked

The instance (modified in place).

Changed in version 0.20: Return the instance.

Notes

The following sensor types are accepted:

ecg, eeg, emg, eog, exci, ias, misc, resp, seeg, dbs, stim, syst, ecog, hbo, hbr, fnirs_cw_amplitude, fnirs_fd_ac_amplitude, fnirs_fd_phase, fnirs_od

New in version 0.9.0.

Examples using set_channel_types:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
set_eeg_reference(ref_channels='average', projection=False, ch_type='auto', forward=None, verbose=None)[source]#

Specify which reference to use for EEG data.

Use this function to explicitly specify the desired reference for EEG. This can be either an existing electrode or a new virtual channel. This function will re-reference the data according to the desired reference.

Parameters
ref_channelslist of str | str

Can be:

  • The name(s) of the channel(s) used to construct the reference.

  • 'average' to apply an average reference (default)

  • 'REST' to use the Reference Electrode Standardization Technique infinity reference 4.

  • An empty list, in which case MNE will not attempt any re-referencing of the data

projectionbool

If ref_channels='average' this argument specifies if the average reference should be computed as a projection (True) or not (False; default). If projection=True, the average reference is added as a projection and is not applied to the data (it can be applied afterwards with the apply_proj method). If projection=False, the average reference is directly applied to the data. If ref_channels is not 'average', projection must be set to False (the default in this case).

ch_typelist of str | str

The name of the channel type to apply the reference to. Valid channel types are 'auto', 'eeg', 'ecog', 'seeg', 'dbs'. If 'auto', the first channel type of eeg, ecog, seeg or dbs that is found (in that order) will be selected.

New in version 0.19.

forwardinstance of Forward | None

Forward solution to use. Only used with ref_channels='REST'.

New in version 0.21.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Raw | Epochs | Evoked

Data with EEG channels re-referenced. If ref_channels='average' and projection=True a projection will be added instead of directly re-referencing the data.

See also

mne.set_bipolar_reference

Convenience function for creating bipolar references.

Notes

Some common referencing schemes and the corresponding value for the ref_channels parameter:

  • Average reference:

    A new virtual reference electrode is created by averaging the current EEG signal by setting ref_channels='average'. Bad EEG channels are automatically excluded if they are properly set in info['bads'].

  • A single electrode:

    Set ref_channels to a list containing the name of the channel that will act as the new reference, for example ref_channels=['Cz'].

  • The mean of multiple electrodes:

    A new virtual reference electrode is created by computing the average of the current EEG signal recorded from two or more selected channels. Set ref_channels to a list of channel names, indicating which channels to use. For example, to apply an average mastoid reference, when using the 10-20 naming scheme, set ref_channels=['M1', 'M2'].

  • REST

    The given EEG electrodes are referenced to a point at infinity using the lead fields in forward, which helps standardize the signals.

  1. If a reference is requested that is not the average reference, this function removes any pre-existing average reference projections.

  2. During source localization, the EEG signal should have an average reference.

  3. In order to apply a reference, the data must be preloaded. This is not necessary if ref_channels='average' and projection=True.

  4. For an average or REST reference, bad EEG channels are automatically excluded if they are properly set in info['bads'].

New in version 0.9.0.

References

4

D. Yao. A method to standardize a reference of scalp EEG recordings to a point at infinity. Physiological Measurement, 22(4):693–711, 2001. doi:10.1088/0967-3334/22/4/305.

set_meas_date(meas_date)[source]#

Set the measurement start date.

Parameters
meas_datedatetime | float | tuple | None

The new measurement date. If datetime object, it must be timezone-aware and in UTC. A tuple of (seconds, microseconds) or float (alias for (meas_date, 0)) can also be passed and a datetime object will be automatically created. If None, will remove the time reference.

Returns
instinstance of Raw | Epochs | Evoked

The modified raw instance. Operates in place.

Notes

If you want to remove all time references in the file, call mne.io.anonymize_info(inst.info) after calling inst.set_meas_date(None).

New in version 0.20.

set_montage(montage, match_case=True, match_alias=False, on_missing='raise', verbose=None)[source]#

Set EEG/sEEG/ECoG/DBS/fNIRS channel positions and digitization points.

Parameters
montageNone | str | DigMontage

A montage containing channel positions. If str or DigMontage is specified, the channel info will be updated with the channel positions. Default is None. For valid str values see documentation of mne.channels.make_standard_montage(). See also the documentation of mne.channels.DigMontage for more information.

match_casebool

If True (default), channel name matching will be case sensitive.

New in version 0.20.

match_aliasbool | dict

Whether to use a lookup table to match unrecognized channel location names to their known aliases. If True, uses the mapping in mne.io.constants.CHANNEL_LOC_ALIASES. If a dict is passed, it will be used instead, and should map from non-standard channel names to names in the specified montage. Default is False.

New in version 0.23.

on_missing‘raise’ | ‘warn’ | ‘ignore’

Can be 'raise' (default) to raise an error, 'warn' to emit a warning, or 'ignore' to ignore when channels have missing coordinates.

New in version 0.20.1.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
instinstance of Raw | Epochs | Evoked

The instance.

Notes

Operates in place.

Warning

Only EEG/sEEG/ECoG/DBS/fNIRS channels can have their positions set using a montage. Other channel types (e.g., MEG channels) should have their positions defined properly using their data reading functions.

Examples using set_montage:

Working with sEEG data

Working with sEEG data

Working with sEEG data
shift_time(tshift, relative=True)[source]#

Shift time scale in epoched or evoked data.

Parameters
tshiftfloat

The (absolute or relative) time shift in seconds. If relative is True, positive tshift increases the time value associated with each sample, while negative tshift decreases it.

relativebool

If True, increase or decrease time values by tshift seconds. Otherwise, shift the time values such that the time of the first sample equals tshift.

Returns
epochsinstance of Epochs

The modified Epochs instance.

Notes

This method allows you to shift the time values associated with each data sample by an arbitrary amount. It does not resample the signal or change the data values in any way.

Examples using shift_time:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
standard_error(picks=None, by_event_type=False)[source]#

Compute standard error over epochs.

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all data channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

by_event_typebool

When False (the default) all epochs are processed together and a single Evoked object is returned. When True, epochs are first grouped by event type (as specified using the event_id parameter) and a list is returned containing a separate Evoked object for each event type. The .comment attribute is set to the label of the event type.

New in version 0.24.0.

Returns
std_errinstance of Evoked | list of Evoked

The standard error over epochs. When by_event_type=True was specified, a list is returned containing a separate Evoked object for each event type. The list has the same order as the event types as specified in the event_id dictionary.

subtract_evoked(evoked=None)[source]#

Subtract an evoked response from each epoch.

Can be used to exclude the evoked response when analyzing induced activity, see e.g. [1].

Parameters
evokedinstance of Evoked | None

The evoked response to subtract. If None, the evoked response is computed from Epochs itself.

Returns
selfinstance of Epochs

The modified instance (instance is also modified inplace).

References

1

David et al. “Mechanisms of evoked and induced responses in MEG/EEG”, NeuroImage, vol. 31, no. 4, pp. 1580-1591, July 2006.

time_as_index(times, use_rounding=False)[source]#

Convert time to indices.

Parameters
timeslist-like | float | int

List of numbers or a number representing points in time.

use_roundingbool

If True, use rounding (instead of truncation) when converting times to indices. This can help avoid non-unique indices.

Returns
indexndarray

Indices corresponding to the times supplied.

Examples using time_as_index:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
property times#

Time vector in seconds.

property tmax#

Last time point.

property tmin#

First time point.

to_data_frame(picks=None, index=None, scalings=None, copy=True, long_format=False, time_format='ms', *, verbose=None)[source]#

Export data in tabular structure as a pandas DataFrame.

Channels are converted to columns in the DataFrame. By default, additional columns “time”, “epoch” (epoch number), and “condition” (epoch event description) are added, unless index is not None (in which case the columns specified in index will be used to form the DataFrame’s index instead).

Parameters
picksstr | list | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. In lists, channel type strings (e.g., ['meg', 'eeg']) will pick channels of those types, channel name strings (e.g., ['MEG0111', 'MEG2623'] will pick the given channels. Can also be the string values “all” to pick all channels, or “data” to pick data channels. None (default) will pick all channels. Note that channels in info['bads'] will be included if their names or indices are explicitly provided.

indexstr | list of str | None

Kind of index to use for the DataFrame. If None, a sequential integer index (pandas.RangeIndex) will be used. If 'time', a pandas.Float64Index, pandas.Int64Index, or pandas.TimedeltaIndex will be used (depending on the value of time_format). If a list of two or more string values, a pandas.MultiIndex will be created. Valid string values are ‘time’, ‘epoch’, and ‘condition’. Defaults to None.

scalingsdict | None

Scaling factor applied to the channels picked. If None, defaults to dict(eeg=1e6, mag=1e15, grad=1e13) — i.e., converts EEG to µV, magnetometers to fT, and gradiometers to fT/cm.

copybool

If True, data will be copied. Otherwise data may be modified in place. Defaults to True.

long_formatbool

If True, the DataFrame is returned in long format where each row is one observation of the signal at a unique combination of time point, channel, epoch number, and condition. For convenience, a ch_type column is added to facilitate subsetting the resulting DataFrame. Defaults to False.

time_formatstr | None

Desired time format. If None, no conversion is applied, and time values remain as float values in seconds. If 'ms', time values will be rounded to the nearest millisecond and converted to integers. If 'timedelta', time values will be converted to pandas.Timedelta values. Default is 'ms' in version 0.22, and will change to None in version 0.23.

New in version 0.20.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns
dfinstance of pandas.DataFrame

A dataframe suitable for usage with other statistical/plotting/analysis packages.

Examples using to_data_frame:

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Exporting Epochs to Pandas DataFrames

Exporting Epochs to Pandas DataFrames

Exporting Epochs to Pandas DataFrames
Visualising statistical significance thresholds on EEG data

Visualising statistical significance thresholds on EEG data

Visualising statistical significance thresholds on EEG data

Examples using mne.Epochs#

Overview of MEG/EEG analysis with MNE-Python

Overview of MEG/EEG analysis with MNE-Python

Overview of MEG/EEG analysis with MNE-Python
The Info data structure

The Info data structure

The Info data structure
Getting started with mne.Report

Getting started with mne.Report

Getting started with mne.Report
Working with CTF data: the Brainstorm auditory dataset

Working with CTF data: the Brainstorm auditory dataset

Working with CTF data: the Brainstorm auditory dataset
Working with events

Working with events

Working with events
Overview of artifact detection

Overview of artifact detection

Overview of artifact detection
Handling bad channels

Handling bad channels

Handling bad channels
Rejecting bad data spans and breaks

Rejecting bad data spans and breaks

Rejecting bad data spans and breaks
Filtering and resampling data

Filtering and resampling data

Filtering and resampling data
Repairing artifacts with regression

Repairing artifacts with regression

Repairing artifacts with regression
Repairing artifacts with ICA

Repairing artifacts with ICA

Repairing artifacts with ICA
Background on projectors and projections

Background on projectors and projections

Background on projectors and projections
Repairing artifacts with SSP

Repairing artifacts with SSP

Repairing artifacts with SSP
Preprocessing functional near-infrared spectroscopy (fNIRS) data

Preprocessing functional near-infrared spectroscopy (fNIRS) data

Preprocessing functional near-infrared spectroscopy (fNIRS) data
The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data

The Epochs data structure: discontinuous data
Visualizing epoched data

Visualizing epoched data

Visualizing epoched data
Auto-generating Epochs metadata

Auto-generating Epochs metadata

Auto-generating Epochs metadata
Exporting Epochs to Pandas DataFrames

Exporting Epochs to Pandas DataFrames

Exporting Epochs to Pandas DataFrames
Divide continuous data into equally-spaced epochs

Divide continuous data into equally-spaced epochs

Divide continuous data into equally-spaced epochs
The Evoked data structure: evoked/averaged data

The Evoked data structure: evoked/averaged data

The Evoked data structure: evoked/averaged data
EEG processing and Event Related Potentials (ERPs)

EEG processing and Event Related Potentials (ERPs)

EEG processing and Event Related Potentials (ERPs)
Plotting whitened data

Plotting whitened data

Plotting whitened data
Frequency and time-frequency sensor analysis

Frequency and time-frequency sensor analysis

Frequency and time-frequency sensor analysis
Frequency-tagging: Basic analysis of an SSVEP/vSSR dataset

Frequency-tagging: Basic analysis of an SSVEP/vSSR dataset

Frequency-tagging: Basic analysis of an SSVEP/vSSR dataset
Computing a covariance matrix

Computing a covariance matrix

Computing a covariance matrix
Source localization with MNE, dSPM, sLORETA, and eLORETA

Source localization with MNE, dSPM, sLORETA, and eLORETA

Source localization with MNE, dSPM, sLORETA, and eLORETA
Source reconstruction using an LCMV beamformer

Source reconstruction using an LCMV beamformer

Source reconstruction using an LCMV beamformer
EEG source localization given electrode locations on an MRI

EEG source localization given electrode locations on an MRI

EEG source localization given electrode locations on an MRI
Brainstorm Elekta phantom dataset tutorial

Brainstorm Elekta phantom dataset tutorial

Brainstorm Elekta phantom dataset tutorial
Brainstorm CTF phantom dataset tutorial

Brainstorm CTF phantom dataset tutorial

Brainstorm CTF phantom dataset tutorial
4D Neuroimaging/BTi phantom dataset tutorial

4D Neuroimaging/BTi phantom dataset tutorial

4D Neuroimaging/BTi phantom dataset tutorial
Visualising statistical significance thresholds on EEG data

Visualising statistical significance thresholds on EEG data

Visualising statistical significance thresholds on EEG data
Non-parametric 1 sample cluster statistic on single trial power

Non-parametric 1 sample cluster statistic on single trial power

Non-parametric 1 sample cluster statistic on single trial power
Non-parametric between conditions cluster statistic on single trial power

Non-parametric between conditions cluster statistic on single trial power

Non-parametric between conditions cluster statistic on single trial power
Spatiotemporal permutation F-test on full sensor data

Spatiotemporal permutation F-test on full sensor data

Spatiotemporal permutation F-test on full sensor data
Permutation t-test on source data with spatio-temporal clustering

Permutation t-test on source data with spatio-temporal clustering

Permutation t-test on source data with spatio-temporal clustering
Repeated measures ANOVA on source data with spatio-temporal clustering

Repeated measures ANOVA on source data with spatio-temporal clustering

Repeated measures ANOVA on source data with spatio-temporal clustering
Mass-univariate twoway repeated measures ANOVA on single trial power

Mass-univariate twoway repeated measures ANOVA on single trial power

Mass-univariate twoway repeated measures ANOVA on single trial power
Decoding (MVPA)

Decoding (MVPA)

Decoding (MVPA)
Working with sEEG data

Working with sEEG data

Working with sEEG data
Working with ECoG data

Working with ECoG data

Working with ECoG data
Sleep stage classification from polysomnography (PSG) data

Sleep stage classification from polysomnography (PSG) data

Sleep stage classification from polysomnography (PSG) data
Corrupt known signal with point spread

Corrupt known signal with point spread

Corrupt known signal with point spread
DICS for power mapping

DICS for power mapping

DICS for power mapping
Getting averaging info from .fif files

Getting averaging info from .fif files

Getting averaging info from .fif files
Generate simulated raw data

Generate simulated raw data

Generate simulated raw data
Simulate raw data using subject anatomy

Simulate raw data using subject anatomy

Simulate raw data using subject anatomy
Generate simulated source data

Generate simulated source data

Generate simulated source data
Define target events based on time lag, plot evoked response

Define target events based on time lag, plot evoked response

Define target events based on time lag, plot evoked response
Transform EEG data using current source density (CSD)

Transform EEG data using current source density (CSD)

Transform EEG data using current source density (CSD)
Show EOG artifact timing

Show EOG artifact timing

Show EOG artifact timing
Maxwell filter data with movement compensation

Maxwell filter data with movement compensation

Maxwell filter data with movement compensation
Plot sensor denoising using oversampled temporal projection

Plot sensor denoising using oversampled temporal projection

Plot sensor denoising using oversampled temporal projection
XDAWN Denoising

XDAWN Denoising

XDAWN Denoising
Visualize channel over epochs as an image

Visualize channel over epochs as an image

Visualize channel over epochs as an image
Whitening evoked data with a noise covariance

Whitening evoked data with a noise covariance

Whitening evoked data with a noise covariance
Plot single trial activity, grouped by ROI and sorted by RT

Plot single trial activity, grouped by ROI and sorted by RT

Plot single trial activity, grouped by ROI and sorted by RT
Compare evoked responses for different conditions

Compare evoked responses for different conditions

Compare evoked responses for different conditions
Compute a cross-spectral density (CSD) matrix

Compute a cross-spectral density (CSD) matrix

Compute a cross-spectral density (CSD) matrix
Compute Power Spectral Density of inverse solution from single epochs

Compute Power Spectral Density of inverse solution from single epochs

Compute Power Spectral Density of inverse solution from single epochs
Compute power and phase lock in label of the source space

Compute power and phase lock in label of the source space

Compute power and phase lock in label of the source space
Compute induced power in the source space with dSPM

Compute induced power in the source space with dSPM

Compute induced power in the source space with dSPM
Compute and visualize ERDS maps

Compute and visualize ERDS maps

Compute and visualize ERDS maps
Explore event-related dynamics for specific frequency bands

Explore event-related dynamics for specific frequency bands

Explore event-related dynamics for specific frequency bands
Permutation F-test on sensor data with 1D cluster level

Permutation F-test on sensor data with 1D cluster level

Permutation F-test on sensor data with 1D cluster level
FDR correction on T-test on sensor data

FDR correction on T-test on sensor data

FDR correction on T-test on sensor data
Regression on continuous data (rER[P/F])

Regression on continuous data (rER[P/F])

Regression on continuous data (rER[P/F])
Permutation T-test on sensor data

Permutation T-test on sensor data

Permutation T-test on sensor data
Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)

Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)

Motor imagery decoding from EEG data using the Common Spatial Pattern (CSP)
Decoding in time-frequency space using Common Spatial Patterns (CSP)

Decoding in time-frequency space using Common Spatial Patterns (CSP)

Decoding in time-frequency space using Common Spatial Patterns (CSP)
Representational Similarity Analysis

Representational Similarity Analysis

Representational Similarity Analysis
Decoding source space data

Decoding source space data

Decoding source space data
Continuous Target Decoding with SPoC

Continuous Target Decoding with SPoC

Continuous Target Decoding with SPoC
Decoding sensor space data with generalization across time and conditions

Decoding sensor space data with generalization across time and conditions

Decoding sensor space data with generalization across time and conditions
Analysis of evoked response using ICA and PCA reduction techniques

Analysis of evoked response using ICA and PCA reduction techniques

Analysis of evoked response using ICA and PCA reduction techniques
XDAWN Decoding From EEG data

XDAWN Decoding From EEG data

XDAWN Decoding From EEG data
Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)

Compute effect-matched-spatial filtering (EMS)
Linear classifier on sensor data with plot patterns and filters

Linear classifier on sensor data with plot patterns and filters

Linear classifier on sensor data with plot patterns and filters
Compute Spectro-Spatial Decomposition (SSD) spatial filters

Compute Spectro-Spatial Decomposition (SSD) spatial filters

Compute Spectro-Spatial Decomposition (SSD) spatial filters
Compute MNE-dSPM inverse solution on single epochs

Compute MNE-dSPM inverse solution on single epochs

Compute MNE-dSPM inverse solution on single epochs
Compute source power using DICS beamformer

Compute source power using DICS beamformer

Compute source power using DICS beamformer
Compute evoked ERS source power using DICS, LCMV beamformer, and dSPM

Compute evoked ERS source power using DICS, LCMV beamformer, and dSPM

Compute evoked ERS source power using DICS, LCMV beamformer, and dSPM
Compute source power estimate by projecting the covariance with MNE

Compute source power estimate by projecting the covariance with MNE

Compute source power estimate by projecting the covariance with MNE
Compute iterative reweighted TF-MxNE with multiscale time-frequency dictionary

Compute iterative reweighted TF-MxNE with multiscale time-frequency dictionary

Compute iterative reweighted TF-MxNE with multiscale time-frequency dictionary
Compute cross-talk functions for LCMV beamformers

Compute cross-talk functions for LCMV beamformers

Compute cross-talk functions for LCMV beamformers
Brainstorm raw (median nerve) dataset

Brainstorm raw (median nerve) dataset

Brainstorm raw (median nerve) dataset
Optically pumped magnetometer (OPM) data

Optically pumped magnetometer (OPM) data

Optically pumped magnetometer (OPM) data
From raw data to dSPM on SPM Faces dataset

From raw data to dSPM on SPM Faces dataset

From raw data to dSPM on SPM Faces dataset